Ports (24x GbE): 24u00d7 Gigabit Ethernet with PoE+
Uplink Ports: 2u00d7 10G SFP+
PoE Budget: 370W
Layer Support: L2/L3
Stacking Support: UniFi Controller managed (no native stacking)
Management: UniFi Controller / Web UI
Max Power Consumption: 740W
Operating Temperature: -10u00b0C to 55u00b0C
Dimensions: 440 u00d7 290 u00d7 44 mm
Mounting: Rackmount (1U)
Curation Review
✔ Pros:Industry-leading 370W PoE budget supports high-density PoE deployments; Dual 10G SFP+ uplinks provide future-proof uplink capacity; Intuitive UniFi Controller integration simplifies network management and monitoring; Layer 3 capabilities enable inter-VLAN routing without external gateway; Excellent build quality with fanless operation options available; Strong price-to-performance ratio for enterprise-grade hardware
✘ Cons:Requires UniFi Controller for advanced features—standalone management is limited; No native switch stacking limits scalability without controller; 10G uplinks are SFP+ (not RJ45) requiring additional transceivers; Limited CLI customization compared to enterprise vendors like Cisco/Arista; Thermal performance under maximum PoE load requires adequate rack ventilation; PoE+ cannot simultaneously max out on all 24 ports simultaneously due to power budget constraints
Est. Price:
$1,500 - $2,200
Compare Against
Ubiquiti UniFi Pro Max 24 PoE
★ 5.0 Value Score
Technical Specifications
Device Type: Managed Switch
Switching Capacity: 528 Gbps
Forwarding Rate: 395 Mpps
Ports: 24x 2.5G PoE + 2x 10G SFP+
PoE Budget: 600W
Layer: L3 (Layer 3)
Stacking Support: No
Management: UniFi Network Application
Cooling: Fanless with passive cooling option
Power Consumption: Approx 80-250W (depending on PoE load)
Max PoE Devices: 24
Throughput per 2.5G Port: 2.5 Gbps full duplex
Curation Review
✔ Pros:Excellent 2.5G port density at mid-range price; Fanless design offers silent operation and reliability; 600W PoE budget supports modern high-power devices; Integrated into UniFi ecosystem for centralized management; 10G uplink SFP+ ports for aggregation; Low latency and responsive performance; Energy efficient under typical loads
✘ Cons:Limited to L3 (no advanced routing); No stacking support limits scalability for large deployments; 2.5G ports may not justify cost if 1G sufficient for use case; Passive cooling means outdoor/high-temp deployments not recommended; Limited redundancy/HA features compared to enterprise switches; SFP+ modules sold separately