PACKETPERF

Primary Device

Ubiquiti UniFi Switch Pro Max 16 PoE
Ubiquiti UniFi Switch Pro Max 16 PoE
★ 3.3 Value Score

Technical Specifications

  • Switching Capacity: 84 Gbps
  • Forwarding Rate: 62.5 Mpps (62.496 Mpps per third-party listings; Ubiquiti's US page rounds to 62 Mpps)
  • Non-Blocking Switching Throughput: 42 Gbps
  • Ports: 16 total: 12x 1GbE RJ-45 (PoE/PoE+), 4x 2.5GbE RJ-45 (PoE++), 2x 10G SFP+
  • PoE Budget: 180 W total; 60 W per PoE++ port
  • Layer: Layer 3 (managed)
  • Stacking support: Not specified in available sources

Curation Review

  • ✔ Pros: Layer 3 managed switch with 84 Gbps switching capacity; 4x 2.5GbE PoE++ ports for multi-gig access points or high-power devices; 180 W total PoE budget with 60 W per PoE++ port; supports 802.3af/at/bt PoE standards; 2x 10G SFP+ uplinks for fast aggregation; competitive US list price of $399 from Ubiquiti's store
  • ✘ Cons: 180 W total PoE budget can be exhausted quickly if many PoE++ devices are connected at full load; only 4 of 16 ports are multi-gig (2.5GbE), with the rest at 1GbE; uplinks are SFP+ only, so 10G copper uplinks need an additional module or adapter; advanced Layer 3 features depend on UniFi Network controller management; stacking support is not documented in the sources reviewed; regional pricing varies widely and resellers often charge more than Ubiquiti's list price
  • Est. Price: $399 - $487

Compare Against

Ubiquiti Switch Pro Max 24 PoE
Ubiquiti Switch Pro Max 24 PoE
★ 4.1 Value Score

Technical Specifications

  • Switching Capacity: 112 Gbps
  • Non-Blocking Throughput: 56 Gbps
  • Forwarding Rate: 83.3 Mpps
  • Ports: 24 total: 8x 2.5GbE PoE++, 8x 1GbE PoE++, 8x 1GbE PoE+, plus 2x 10G SFP+ uplinks
  • PoE Budget: 400W total (max 60W per port)
  • Layer: L3
  • Stacking support: Not confirmed; no physical stacking documented in sources reviewed
  • MAC Address Table Size: 32,000 entries
  • Packet Buffer Size: 2 MB
  • Form Factor: 1U rack-mountable, 442 x 325 x 44 mm, 5.1 kg without brackets
  • Management: UniFi Network 8.0.24+
  • Operating Temperature: -5 to 40u00b0C (23 to 104u00b0F)
  • Certifications: CE, FCC, IC (one listing states NDAA compliant)

Curation Review

  • ✔ Pros: Layer 3 switching in a 24-port 1U chassis; 8x 2.5GbE PoE++ ports for multi-gig wireless and workstation uplinks; 400W total PoE budget with up to 60W per port; 2x 10G SFP+ uplinks; 112 Gbps switching capacity and 56 Gbps non-blocking throughput; managed centrally through UniFi Network; list price of $799 USD from Ubiquiti's US store is competitive for L3 PoE++ hardware
  • ✘ Cons: 400W total PoE budget is limited if many high-power PoE++ devices are connected at once; No physical stacking documented, so scaling beyond one unit needs separate management; Port breakdown is described inconsistently across retailer listings, so the official Ubiquiti datasheet should be checked; Reseller prices vary widely (about $799 to $951 USD, plus higher regional prices); Independent hands-on reviews with measured performance were not found; Requires UniFi Network 8.0.24 or later for management
  • Est. Price: $799 - $951

Popular Comparisons

Ubiquiti UniFi Switch Pro Max 16 PoE vs Ubiquiti Pro Max Aggregation (USW-Pro-Max-Aggregation) Ubiquiti UniFi Switch Pro Max 16 PoE vs Cisco Cisco Catalyst 9200L Ubiquiti UniFi Switch Pro Max 16 PoE vs Aruba (HPE) Aruba CX 6200 Ubiquiti UniFi Switch Pro Max 16 PoE vs Ubiquiti Enterprise 8 PoE Ubiquiti UniFi Switch Pro Max 16 PoE vs Ubiquiti Switch Pro Max 24 PoE