Firewall Throughput: Not published by Ubiquiti; 5 Gbps IDS/IPS-secured routing throughput is the only headline figure (reviewer and retailer listings)
Threat Prevention Throughput: 5 Gbps IDS/IPS
IPsec VPN Throughput: Not published
Max Sessions: Not published; 500+ simultaneous users and 4,000-entry MAC address table
New Sessions/sec: Not published
Interfaces: 2x 10G SFP+; 1x 10GbE RJ45 (10G/2.5G/1G); 4x 2.5GbE RJ45 (2.5G/1G/100M/10M); 2 of the 6 WAN-capable ports are default WAN (1x 10G SFP+ and 1x 10GbE RJ45), with the other ports selectable as WAN
Form Factor: Compact desktop; 212.8 x 127.6 x 30 mm; 675 g without SSD
CPU / RAM: Quad-core ARM Cortex-A73 at 2.2 GHz / 3 GB RAM
Storage: Optional NVMe SSD up to 2 TB (NVR storage)
PoE Budget: 30W total from one PoE+ port (port 4)
Max Power Consumption: 29.4W excluding PoE output
Curation Review
✔ Pros:Lowest-cost Ubiquiti gateway with 5 Gbps IDS/IPS, rated above the UDM-SE's 3.5 Gbps at a lower launch price ($279 MSRP vs. $499); Multi-gig flexibility with 10GBASE-T, dual SFP+ and four 2.5GbE ports; Compact desktop design with optional NVMe storage for UniFi Protect/NVR use; Supports site-to-site VPN plus OpenVPN, WireGuard and L2TP server functions, with integrated PoE+ for one device; Managed through the UniFi Network controller with 500+ simultaneous user capacity
✘ Cons:No official routing, IPsec or WireGuard throughput figures published by Ubiquiti; community WireGuard numbers (around 400-500 Mbps) are unverified; Only one PoE+ output port (30W total) versus eight PoE ports on the UDM-SE; Lower device and user capacity and less storage expansion than the UDM-SE; No published IPsec tunnel or concurrent session limits; Reseller prices now often run above the launch MSRP (about $320-$346 USD at US resellers)
Est. Price:
$279 - $346
Compare Against
Palo Alto Networks PA-545-PoE
★ 3.5 Value Score
Technical Specifications
Firewall Throughput: 5.1 Gbps App-ID (appmix). Reseller listings also show 5.0 Gbps; the official PA-500 datasheet was not retrievable to confirm
Threat Prevention Throughput: 3.6 Gbps (reseller listings also show 3.0 Gbps; unverified)
PoE Budget: 181W total across ports 9-12, up to 90W per port (official Palo Alto electrical spec)
Max Power Consumption: 336W (official Palo Alto electrical spec); 100-240V AC input, 54VDC adapter output, 6A @ 54VDC
Layer: L2/L3 security appliance (Layer 7 NGFW)
Power Redundancy: 2 DC inputs; one PSU required, second optional
Virtual Systems: 1 base / 7 max (one listing shows 1/2)
Price Source Note: Single reseller listing (Newegg, $5,475.00, marked out of stock). CDW shows a quote-only price. No official Palo Alto list price found
Curation Review
✔ Pros:Four mGig 2.5G PoE+ ports suit Wi-Fi 6/6E APs and cameras without a separate injector; Four SFP 1G ports allow fiber uplinks or fiber-to-copper flexibility; Dual DC power inputs with optional second PSU add power redundancy; Fail-open ports 3-4 keep pass-through connectivity during power or OS failure; Zero Touch Provisioning on port 1 simplifies branch deployment; Compact 1U footprint with full Palo Alto Networks NGFW feature set and PAN-OS
✘ Cons:No 10G port support; SFP ports are 1G only, which limits high-speed uplinks; Only four PoE ports and a 181W total PoE budget, versus 332W on the PA-555-POE; Performance figures conflict across reseller sources and the official datasheet could not be retrieved to confirm them; Pricing is quote-based at many resellers, with the one listed price showing out of stock; Licensing (Threat Prevention, URL, support subscriptions) adds recurring cost beyond the hardware price