Ubiquiti UniFi Cloud Gateway Max (UCG-Max) vs Juniper Networks SRX4600: Specs & Price Comparison

Ubiquiti UniFi Cloud Gateway Max (UCG-Max)

★ 4.9 Value Score

Firewall Throughput: Not published by Ubiquiti in the sources reviewed
Threat Prevention Throughput: 2.3 Gbps IDS/IPS per Ubiquiti spec page (older listings show 1.5 Gbps)
IPsec VPN Throughput: Not published by Ubiquiti; third-party reviews report about 800-1,000 Mbps for WireGuard and 300-400 Mbps for OpenVPN
Max Sessions: Not published in the sources reviewed
New Sessions/sec: Not published in the sources reviewed
Interfaces: 1x 2.5GbE RJ45 WAN, 4x GbE RJ45 LAN (one LAN port can be reconfigured as a second WAN for multi-WAN)
Form Factor: Compact desktop; UCG-Max-NS variant includes 512GB NVMe storage

✔ Pros: Low entry price at $199 MSRP; Compact desktop form factor; Five-port layout with multi-WAN support via a reconfigurable LAN port; Runs UniFi OS with integrated IDS/IPS, site-to-site and remote VPN options (IPsec, WireGuard, OpenVPN, L2TP); Manages 30+ UniFi devices and 300+ clients per Ubiquiti listing
✘ Cons: Routing and IPS throughput (2.3 Gbps) is modest for multi-gigabit WANs with inspection enabled; Published throughput figures conflict across sources (1.5 vs 2.3 Gbps IPS, varying VPN numbers); Only one 2.5GbE port, with the remaining ports at 1GbE; Vendor does not publish IPsec tunnel, session, or new-connection limits; Some resellers list prices well above MSRP (one US listing at $394.79)
Est. Price: $199 - $279

Juniper Networks SRX4600

★ 4.1 Value Score

Firewall Throughput: Up to 400 Gbps (1518B and IMIX, per Juniper HCT hardware specs). Older datasheet figures differ and should be checked against the current Junos release.
Threat Prevention Throughput: Not confirmed in verified sources. An older datasheet cites roughly 80-90 Gbps with application security enabled; treat as unverified.
IPsec VPN Throughput: 71 Gbps (1400B); 44 Gbps (IMIX)
Max Sessions: 60,000,000 (60M concurrent IPv4/IPv6 sessions)
New Sessions/sec: 500,000-600,000 (sources disagree; not confirmed on the current spec page)
Interfaces: 8x 10GbE SFP+; 4x QSFP28 (40/100GbE, channelizable); 4x SFP+ chassis cluster/HA ports; 1x RJ-45 console; 1x RJ-45 management; 1x USB Type A; timing ports (GNSS, 10 MHz, BITS, PPS, ToD)
IPsec Tunnels: 7,500
SSL Connections Per Second: 16,000
Form Factor: 1U fixed chassis (1.72 in / 4.37 cm height); 2x hot-swappable PSUs in 1+1 redundancy; front-to-back airflow; AC max 800 W, AC average 650 W; DC variant also available
PoE: Not applicable (security gateway, no PoE)

✔ Pros: Up to 400 Gbps rated firewall throughput in a 1U chassis; 4x QSFP28 ports allow 40/100GbE uplinks alongside 8x 10GbE; Dedicated SFP+ chassis cluster ports support active/passive HA; Very high concurrent session capacity (about 60M) and 7,500 IPsec tunnels; Redundant hot-swappable 1+1 power supplies with front-to-back airflow; Junos-based SRX platform with full security service options
✘ Cons: New units list at roughly $117,000-$211,000 before subscriptions, far above most SMB and mid-market needs; Threat prevention throughput is not clearly published, and the 400 Gbps figure is an up-to rating under Juniper's test conditions; Published new-connections-per-second and older AppSecure/IPsec figures conflict across sources; Advanced security subscriptions add substantial cost (one listing shows about $255,000 for a 7-year Advanced bundle); No PoE or wireless capability, so it serves only as a security gateway; Juniper's official spec pages redirected to HPE during research, so confirm current support and lifecycle status before purchase
Est. Price: $117,036 - $211,505

PACKETPERF