PACKETPERF

Primary Device

Cisco Catalyst 9176I (CW9176I)
Cisco Catalyst 9176I (CW9176I)
★ 4.3 Value Score

Technical Specifications

  • Wi-Fi Standard: 802.11be (Wi-Fi 7), backward compatible with 802.11a/b/g/n/ac/ax; Wi-Fi Alliance Wi-Fi 7 (R1) certified
  • Spatial Streams (MIMO): 4x4:4SS on each of the three serving radios (12 total); 2.4 GHz drops to 2x2 under 802.3at
  • Aggregate Throughput: Up to 18 Gbps PHY rate (802.11be, 4x4 at 320 MHz on 6 GHz, 160 MHz on 5 GHz, 20 MHz on 2.4 GHz); not a sustained throughput figure. Per-band PHY maximums per Meraki datasheet: 6 GHz 11,520 Mbps, 5 GHz 5,700 Mbps, 2.4 GHz 688 Mbps. Some listings cite 23 Gbps, which Cisco's datasheet appears to have as a typo
  • Radios (bands): Three 4x4 serving radios (2.4 GHz, 5 GHz, 6 GHz); dedicated tri-band scanning radio (WIDS/WIPS, spectrum analysis); 2.4 GHz IoT radio; integrated BLE 5.3 (upgradable to BLE 6.0 in software); integrated GNSS/GPS and UWB
  • Uplink Port Speed: 1x RJ-45 multigigabit (100M/1G/2.5G/5G/10G); 10G requires Cat6/Cat6A cabling; plus 1x USB 2.0 (9W) and 1x RJ-45 management console
  • Max Clients: 1,200 total per Cisco scale (400 per radio); Cisco does not state a recommended practical client count
  • PoE Requirement: 802.3bt Class 5 (UPOE), 39W max, required for 10G uplink, 4x4 on all bands and USB; 802.3at (25.5W) gives 2.5G uplink, 2x2 on 2.4 GHz and no USB; 802.3af (13.95W) for staging only with radios off. Cisco recommends CW-INJ-8 injector
  • Antenna / Form Factor: Indoor, internal omnidirectional antennas (5 dBi 2.4 GHz, 6 dBi 5/6 GHz); directional variant is CW9176D1; 9.5 x 9.5 x 2.0 in (24 x 24 x 5.1 cm), 3.4 lb (1.56 kg)
  • Management: Catalyst 9800 Series Wireless Controller (on-premises) or Meraki cloud management, depending on SKU; Meraki requires a license
  • Price Source: Single reseller only (Aztek Computers, CW9176I-CFG, new, $3,547.97 current, $4,789.76 struck-through reference). No Cisco list price found. Cisco directs buyers to its price list or a partner quote

Curation Review

  • ✔ Pros: Tri-band Wi-Fi 7 with 4x4 on all three client radios, giving high per-client throughput on 2.4, 5 and 6 GHz; Dedicated tri-band scanning radio supports 24/7 WIDS/WIPS and spectrum analysis without taking a client radio out of service; Integrated BLE 5.3, GNSS and UWB radios support asset tracking and location services in one AP; 10G mGig uplink removes the 1G bottleneck for Wi-Fi 7 traffic when 802.3bt PoE is available; Flexible management: Catalyst 9800 controller or Meraki cloud, with 1,200-client scale per Cisco; Wi-Fi 7 (R1), WPA3 and Suite B certifications
  • ✘ Cons: 10G uplink and full 4x4 radio operation need 802.3bt (39W) PoE; 802.3at drops to 2.5G, reduces the 2.4 GHz radio to 2x2 and disables USB, which can force switch upgrades; Advertised 18 to 23 Gbps figures are PHY rates, not real-world throughput, and vendor sources disagree on the 23 Gbps value; Only one 10G uplink port and no second uplink for redundancy; Indoor omnidirectional model only; the directional variant is a separate SKU (CW9176D1); Meraki-managed SKUs require an ongoing license; Pricing data is limited to one reseller, and no official Cisco list price was found; Spec sources conflict on PoE (Cisco says 39W, a Meraki document says 60W Class 6), so verify before purchase
  • Est. Price: $3,548 - $4,790

Compare Against

Juniper Networks AP47
Juniper Networks AP47
★ 3.4 Value Score

Technical Specifications

  • Wi-Fi Standard: Wi-Fi 7 (IEEE 802.11be); backward compatible with 802.11a/b/g/n/ac/ax
  • Spatial Streams (MIMO): 4x4 MIMO with 4 spatial streams per data radio (4x4:4)
  • Aggregate Throughput: Up to 28.8 Gbps (reseller/marketing aggregate). Per-band rates: 11,528 Mbps (6 GHz), 5,764 Mbps (5 GHz), 1,376 Mbps (2.4 GHz). Sources do not reconcile these figures
  • Radios (bands): Three 802.11be data radios (2.4 GHz, 5 GHz, 6 GHz, operating simultaneously) plus one dedicated fourth scanning radio for RRM, security and analytics. 320 MHz channels on 6 GHz; 4K QAM
  • Uplink Port Speed: 2 x Ethernet inputs, both must be in the same VLAN; Mist documentation lists dual 10GbE multigigabit ports. A reseller lists 1 x 5/10GBASE-T. Official datasheet does not state speeds
  • Max Clients: Not published in the sources reviewed
  • PoE Requirement: 802.3bt (Class 6) for full functionality; 802.3at is supported with reduced radio functionality. Dual-source PoE gives hitless failover

Curation Review

  • ✔ Pros: Tri-band Wi-Fi 7 with 4x4 MIMO on three data radios; Dedicated fourth scanning radio for RRM, security and analytics; 320 MHz channel support on 6 GHz with 4K QAM; Integrated vBLE antenna array, 802.15.4 radios, GNSS and UWB for location services; Dual multigigabit uplinks with hitless PoE redundancy when fed from two sources; Backward compatible with legacy 802.11 standards; Managed through Juniper Mist cloud
  • ✘ Cons: Maximum client count is not published by Juniper in the sources reviewed; Full functionality requires 802.3bt PoE, and 802.3at forces reduced radio operation; Uplink speed and aggregate throughput figures differ across sources; Reseller prices of roughly $2,200 to $3,600 USD before subscription, which is a high cost per unit; Cloud licensing subscription is typically bundled and required for Mist management; Wi-Fi 7 requires WPA3 or OWE on WLANs in bands where it is enabled
  • Est. Price: $2,198 - $3,630

Popular Comparisons

Cisco Catalyst 9176I (CW9176I) vs Ubiquiti UniFi U7 Pro Cisco Catalyst 9176I (CW9176I) vs Ubiquiti U6 Pro Cisco Catalyst 9176I (CW9176I) vs Cisco Catalyst 9178i Cisco Catalyst 9176I (CW9176I) vs Cisco Catalyst 9166 Series (CW9166) Cisco Catalyst 9176I (CW9176I) vs Ubiquiti U6-Pro