Wi-Fi Standard: Wi-Fi 7 (802.11be), with 4K-QAM and Multi-Link Operation (MLO)
Spatial Streams (MIMO): 4x4:4 MU-MIMO on each of three radios (12 total per reseller listing)
Aggregate Throughput: 18 Gbps aggregate (Cisco/Meraki and reseller figure; marketing rate, not a measured throughput)
Radios (bands): Tri-radio: 2.4 GHz, 5 GHz, and 6 GHz (each 4x4), plus a dedicated scanning radio and IoT radio (BLE/UWB, GNSS on some SKUs)
Uplink Port Speed: 1x 10 GbE multigigabit RJ-45 (1G/2.5G/5G/10G) per reseller listings; Cisco deployment guide references a 10G mGig PoE-in port. Sources are inconsistent, so verify against the official datasheet
Max Clients: Not confirmed. No official per-AP client figure found in the sources reviewed; community guidance suggests roughly 50-75 active clients per 5 GHz radio
PoE Requirement: 802.3bt (UPOE) for full performance; 802.3at (PoE+) runs in degraded mode (2x2 on 2.4 GHz, reduced features, USB disabled); 802.3af supports staging only. Maximum power draw about 39 W under 802.3bt (Meraki datasheet)
Form Factor: Indoor access point with internal omnidirectional antennas
Licensing: Requires a Cisco Networking Subscription for wireless (Essentials or Advantage)
Pricing Note: Low/high range reflects reseller listings: sale prices about $1,543-$1,628, list price $3,245.83 (CDW, Avendor). Prices vary by reseller and date
Curation Review
✔ Pros:Wi-Fi 7 with 4K-QAM and Multi-Link Operation for high throughput and lower latency; tri-band 4x4 radios on 2.4, 5, and 6 GHz for dense environments; dedicated scanning and IoT radios (BLE/UWB) for location, IoT, and security monitoring without sacrificing client capacity; 10 GbE multigigabit uplink supports high-speed backhaul; flexible management through Cisco IOS-XE controllers, Meraki cloud, or Catalyst Center; full performance on standard 802.3bt PoE without a separate power supply
✘ Cons:Full performance requires 802.3bt (UPOE), and 802.3at PoE+ degrades radios and disables USB; the headline 18 Gbps figure is an aggregate marketing rate, not real-world throughput; no official per-AP client limit was found, which complicates capacity planning; requires a Cisco Networking Subscription license for wireless, adding recurring cost; premium pricing compared with many Wi-Fi 7 alternatives, with large price variation across resellers; indoor-only form factor; conflicting uplink details across sources should be confirmed against the official datasheet
Est. Price:
$1,543 - $3,246
Compare Against
Cisco Catalyst 9178I (CW9178I)
★ 0.0 Value Score
Technical Specifications
Wi-Fi Standard: 802.11be (Wi-Fi 7); also 802.11ax/ac/n and a/b/g
Spatial Streams (MIMO): 4x4:4SS on each client radio (2.4 GHz, 5 GHz, 6 GHz); quad-radio mode adds a second 4x4 5 GHz radio
Aggregate Throughput: Up to 24 Gbps PHY aggregate in quad-radio mode (Cisco datasheet; Meraki lists 24 Gbps as a chipset maximum that may exceed 802.11be operation); up to 18 Gbps in tri-radio mode
Radios (bands): Default tri-radio: 2.4 GHz 4x4 (20 MHz), 5 GHz 4x4 (160 MHz), 6 GHz 4x4 (320 MHz). Quad-radio via Flexible Radio Assignment adds a second 5 GHz radio. Also: dedicated tri-band scanning radio (Air Marshal WIDS/WIPS), integrated IoT radio, BLE 5.3 (upgradable to 6.0), integrated UWB radio (listed on Cisco datasheet; ordering line references UWB), built-in GNSS/GPS
Uplink Port Speed: 2x multigigabit RJ-45 (dual 10G mGig): 100M/1G/2.5G/5G/10G; Cat6/Cat6A required for 10 Gbps
Max Clients: Not stated in Cisco or Meraki datasheets
PoE Requirement: 802.3bt (UPOE, Class 6, 47 W max) for full operation; 802.3at (25.5 W) supported with reduced functionality; 802.3af (13.95 W) for staging only; optional Cisco Power Injector CW-INJ-8; USB 2.0 at 9 W
Layer (L2/L3): Not applicable (wireless access point)
Form Factor: Indoor AP, 9.9 x 9.9 x 2.0 in (251 x 251 x 51 mm) excluding mount plate/brackets, 4.1 lb (1.87 kg); desktop, ceiling, and wall mountable
Datasheet Updated: August 10, 2026 (Cisco)
Curation Review
✔ Pros:Wi-Fi 7 (802.11be) with 4x4 on all client radios; Tri-band with optional quad-radio mode for extra 5 GHz capacity; Dedicated scanning radio for WIDS/WIPS and RF visibility without sacrificing client radios; Dual 10G mGig uplinks with port and power redundancy; Integrated IoT, BLE, GNSS, and UWB radios in one unit; Supports both Catalyst Wireless LAN Controller and Meraki cloud deployments
✘ Cons:Requires 802.3bt (UPOE) PoE for full operation, so many legacy switches cannot power it fully; Full 10G uplink needs Cat6/Cat6A cabling; Aggregate 24 Gbps figure is a PHY maximum rather than real-world throughput; Embedded wireless controller (EWC) mode is not supported; Max client count is not published in the datasheets; Higher price than Wi-Fi 6E alternatives, with list price around $3,896 and street prices of about $2,190 to $2,620 depending on retailer and SKU (-CFG vs -RTG)