Primary Device
Cisco Catalyst 9176I (CW9176I)
★ 4.3 Value Score
Technical Specifications
- Wi-Fi Standard: 802.11be (Wi-Fi 7), backward compatible with 802.11a/b/g/n/ac/ax; Wi-Fi Alliance Wi-Fi 7 (R1) certified
- Spatial Streams (MIMO): 4x4:4SS on each of the three serving radios (12 total); 2.4 GHz drops to 2x2 under 802.3at
- Aggregate Throughput: Up to 18 Gbps PHY rate (802.11be, 4x4 at 320 MHz on 6 GHz, 160 MHz on 5 GHz, 20 MHz on 2.4 GHz); not a sustained throughput figure. Per-band PHY maximums per Meraki datasheet: 6 GHz 11,520 Mbps, 5 GHz 5,700 Mbps, 2.4 GHz 688 Mbps. Some listings cite 23 Gbps, which Cisco's datasheet appears to have as a typo
- Radios (bands): Three 4x4 serving radios (2.4 GHz, 5 GHz, 6 GHz); dedicated tri-band scanning radio (WIDS/WIPS, spectrum analysis); 2.4 GHz IoT radio; integrated BLE 5.3 (upgradable to BLE 6.0 in software); integrated GNSS/GPS and UWB
- Uplink Port Speed: 1x RJ-45 multigigabit (100M/1G/2.5G/5G/10G); 10G requires Cat6/Cat6A cabling; plus 1x USB 2.0 (9W) and 1x RJ-45 management console
- Max Clients: 1,200 total per Cisco scale (400 per radio); Cisco does not state a recommended practical client count
- PoE Requirement: 802.3bt Class 5 (UPOE), 39W max, required for 10G uplink, 4x4 on all bands and USB; 802.3at (25.5W) gives 2.5G uplink, 2x2 on 2.4 GHz and no USB; 802.3af (13.95W) for staging only with radios off. Cisco recommends CW-INJ-8 injector
- Antenna / Form Factor: Indoor, internal omnidirectional antennas (5 dBi 2.4 GHz, 6 dBi 5/6 GHz); directional variant is CW9176D1; 9.5 x 9.5 x 2.0 in (24 x 24 x 5.1 cm), 3.4 lb (1.56 kg)
- Management: Catalyst 9800 Series Wireless Controller (on-premises) or Meraki cloud management, depending on SKU; Meraki requires a license
- Price Source: Single reseller only (Aztek Computers, CW9176I-CFG, new, $3,547.97 current, $4,789.76 struck-through reference). No Cisco list price found. Cisco directs buyers to its price list or a partner quote
Curation Review
- ✔ Pros: Tri-band Wi-Fi 7 with 4x4 on all three client radios, giving high per-client throughput on 2.4, 5 and 6 GHz; Dedicated tri-band scanning radio supports 24/7 WIDS/WIPS and spectrum analysis without taking a client radio out of service; Integrated BLE 5.3, GNSS and UWB radios support asset tracking and location services in one AP; 10G mGig uplink removes the 1G bottleneck for Wi-Fi 7 traffic when 802.3bt PoE is available; Flexible management: Catalyst 9800 controller or Meraki cloud, with 1,200-client scale per Cisco; Wi-Fi 7 (R1), WPA3 and Suite B certifications
- ✘ Cons: 10G uplink and full 4x4 radio operation need 802.3bt (39W) PoE; 802.3at drops to 2.5G, reduces the 2.4 GHz radio to 2x2 and disables USB, which can force switch upgrades; Advertised 18 to 23 Gbps figures are PHY rates, not real-world throughput, and vendor sources disagree on the 23 Gbps value; Only one 10G uplink port and no second uplink for redundancy; Indoor omnidirectional model only; the directional variant is a separate SKU (CW9176D1); Meraki-managed SKUs require an ongoing license; Pricing data is limited to one reseller, and no official Cisco list price was found; Spec sources conflict on PoE (Cisco says 39W, a Meraki document says 60W Class 6), so verify before purchase
- Est. Price: $3,548 - $4,790
Compare Against
Cisco Catalyst CW9171
★ 3.3 Value Score
Technical Specifications
- Wi-Fi Standard: 802.11be (Wi-Fi 7), 802.11ax (Wi-Fi 6/6E), 802.11ac, 802.11n v2.0, with 802.11a/b/g support
- Spatial Streams (MIMO): 2x2:2 on each radio (2.4 GHz and 5 GHz or 6 GHz)
- Aggregate Throughput: 6120 Mbps aggregate data rate (PHY rates up to 6.0 Gbps on 6 GHz, 2x2, 320 MHz channels)
- Radios (bands): Dual-radio, tri-band: 2.4 GHz + 5 GHz or 6 GHz, plus dedicated scanning/aux radio and IoT radio (802.15.4), plus BLE radio
- Uplink Port Speed: 1x multigigabit RJ-45 at 100M/1G/2.5G (Cat5e/Cat6/Cat6A)
- Max Clients: 256 per radio (per Cisco deployment guide; not stated on the datasheet)
- PoE Requirement: 802.3at (PoE+) for full functionality; 802.3af (PoE) supports only a reduced 1x1 2.4 GHz radio with 1G link; 54V DC input also supported (max power 30W)
- Power Consumption: 9.8W idle, 11.4W typical on 802.3at (dual radio)
- Bluetooth / IoT: BLE radio (datasheet lists BLE 5.3 in features and BLE 6 upgrade path in specs); IoT radio supports 802.15.4
- Form Factor: Indoor AP, 20 x 20 x 5.3 cm, 874 g; mounts with AIR-AP-BRACKET-1 or -2
- Antennas: Internal omnidirectional; peak gain 4 dBi (2.4 GHz), 5.5 dBi (5 GHz), 6 dBi (6 GHz), 2 dBi (IoT)
- Management: Cisco IOS XE 17.18.2+ with Catalyst 9800 controllers or Catalyst 9000 EWC; Meraki MR 32.1.5+ cloud management (CW9171I-RTG); requires Cisco Networking Subscription (Wireless Essentials or Advantage)
Curation Review
- ✔ Pros: Wi-Fi 7 (802.11be) with 6 GHz support and 320 MHz channels; 6120 Mbps aggregate rate; 2.5G multigigabit uplink for a single PoE+ cable; dedicated scanning radio for security and RF monitoring; integrated BLE and 802.15.4 IoT radios; low power draw (about 11.4W typical); flexible management via Catalyst 9800 or Meraki cloud
- ✘ Cons: Only one uplink port, with no secondary Ethernet for redundancy or link aggregation; 2x2 radios trail 4x4 or 6x6 Wi-Fi 7 APs in high-density environments; full functionality requires 802.3at PoE+ (802.3af gives only a reduced 1x1 2.4 GHz radio); requires a paid Cisco Networking Subscription; max client count not published on the datasheet; BLE version is stated inconsistently across Cisco's pages
- Est. Price: $502 - $918