PACKETPERF

Primary Device

Cisco Catalyst 9178i
Cisco Catalyst 9178i
★ 4.3 Value Score

Technical Specifications

  • Wi-Fi Standard: Wi-Fi 7 (802.11be) per Cisco datasheet; some resellers label it Wi-Fi 6/6E
  • Spatial Streams (MIMO): 4x4 MU-MIMO (4 spatial streams per radio)
  • Aggregate Throughput: Up to 24 Gbps aggregate frame rate across concurrent 2.4, 5 and 6 GHz radios (Cisco/Meraki); one reseller cites 18 Gbps
  • Radios (bands): Tri-band 2.4 GHz, 5 GHz and 6 GHz; optional quad-radio mode (2x2 on 2.4/6 GHz kept active) plus dedicated scanning radio
  • Uplink Port Speed: 2x 10 Gbps multigigabit (NBASE-T) Ethernet ports with link and power redundancy
  • Max Clients: 1200 (400 per radio, Cisco deployment guide); some sources cite 1600 on 9800-H1 controller; vendor listings cite 200
  • PoE Requirement: 802.3bt (UPOE, Class 6) for full operation, approx. 60 W max power reservation; 802.3at and 802.3af supported with reduced radio capability (2x2 quad-radio mode)
  • Extra Radios / Features: Built-in UWB, BLE and GNSS (GPS) radios; IoT radio on select SKUs
  • Controller / Management: Cisco Catalyst 9800 WLC (IOS XE 17.15.2+), Cisco Catalyst Center, or Meraki Cloud (CW9178I-RTG)

Curation Review

  • ✔ Pros: Wi-Fi 7 with 4x4 MU-MIMO on 2.4, 5 and 6 GHz; Dual 10 Gbps multigigabit uplinks with failover redundancy; Built-in UWB, BLE and GNSS radios for location and IoT use cases; Flexible quad-radio mode for dedicated scanning or security monitoring; Managed by Catalyst 9800 WLC, Catalyst Center or Meraki Cloud
  • ✘ Cons: Expensive compared with mainstream enterprise APs; Full performance requires 802.3bt (UPOE) power, and 802.3at reduces radio capability; Conflicting published figures for client capacity and aggregate throughput; Quad-radio mode trades 5/6 GHz capacity for scanning, so it is not the default; Vendor and reseller spec listings are inconsistent (Wi-Fi 6 vs 7, 2.5/5/10G uplink claims), so verify the exact SKU before purchase
  • Est. Price: $2,188 - $2,796

Compare Against

Cisco Catalyst 9178I (CW9178I)
Cisco Catalyst 9178I (CW9178I)
★ 0.0 Value Score

Technical Specifications

  • Wi-Fi Standard: 802.11be (Wi-Fi 7); also 802.11ax/ac/n and a/b/g
  • Spatial Streams (MIMO): 4x4:4SS on each client radio (2.4 GHz, 5 GHz, 6 GHz); quad-radio mode adds a second 4x4 5 GHz radio
  • Aggregate Throughput: Up to 24 Gbps PHY aggregate in quad-radio mode (Cisco datasheet; Meraki lists 24 Gbps as a chipset maximum that may exceed 802.11be operation); up to 18 Gbps in tri-radio mode
  • Radios (bands): Default tri-radio: 2.4 GHz 4x4 (20 MHz), 5 GHz 4x4 (160 MHz), 6 GHz 4x4 (320 MHz). Quad-radio via Flexible Radio Assignment adds a second 5 GHz radio. Also: dedicated tri-band scanning radio (Air Marshal WIDS/WIPS), integrated IoT radio, BLE 5.3 (upgradable to 6.0), integrated UWB radio (listed on Cisco datasheet; ordering line references UWB), built-in GNSS/GPS
  • Uplink Port Speed: 2x multigigabit RJ-45 (dual 10G mGig): 100M/1G/2.5G/5G/10G; Cat6/Cat6A required for 10 Gbps
  • Max Clients: Not stated in Cisco or Meraki datasheets
  • PoE Requirement: 802.3bt (UPOE, Class 6, 47 W max) for full operation; 802.3at (25.5 W) supported with reduced functionality; 802.3af (13.95 W) for staging only; optional Cisco Power Injector CW-INJ-8; USB 2.0 at 9 W
  • Layer (L2/L3): Not applicable (wireless access point)
  • Form Factor: Indoor AP, 9.9 x 9.9 x 2.0 in (251 x 251 x 51 mm) excluding mount plate/brackets, 4.1 lb (1.87 kg); desktop, ceiling, and wall mountable
  • Datasheet Updated: August 10, 2026 (Cisco)

Curation Review

  • ✔ Pros: Wi-Fi 7 (802.11be) with 4x4 on all client radios; Tri-band with optional quad-radio mode for extra 5 GHz capacity; Dedicated scanning radio for WIDS/WIPS and RF visibility without sacrificing client radios; Dual 10G mGig uplinks with port and power redundancy; Integrated IoT, BLE, GNSS, and UWB radios in one unit; Supports both Catalyst Wireless LAN Controller and Meraki cloud deployments
  • ✘ Cons: Requires 802.3bt (UPOE) PoE for full operation, so many legacy switches cannot power it fully; Full 10G uplink needs Cat6/Cat6A cabling; Aggregate 24 Gbps figure is a PHY maximum rather than real-world throughput; Embedded wireless controller (EWC) mode is not supported; Max client count is not published in the datasheets; Higher price than Wi-Fi 6E alternatives, with list price around $3,896 and street prices of about $2,190 to $2,620 depending on retailer and SKU (-CFG vs -RTG)
  • Est. Price: $2,188 - $2,619

Popular Comparisons

Cisco Catalyst 9178i vs Ubiquiti UniFi U7 Pro Cisco Catalyst 9178i vs Ubiquiti U6 Pro Cisco Catalyst 9178i vs Cisco Catalyst 9176I (CW9176I) Cisco Catalyst 9178i vs Cisco Catalyst 9166 Series (CW9166) Cisco Catalyst 9178i vs Ubiquiti U6-Pro