Radios (bands): 3 simultaneous 802.11ax data radios (2.4 GHz, 5 GHz, 6 GHz) plus 1 dedicated tri-band scanning radio for RRM and security
Uplink Port Speed: 1 x Ethernet0 RJ45 port, 100/1000/2500/5000BASE-T (802.3bz)
Max Clients: Not published by Juniper
PoE Requirement: 802.3at or 802.3bt PoE (powered device); boots in 802.3af mode; reduced functionality on 802.3at/bt; max power draw not published
Antennas: Internal: 2x 2.4 GHz omni (4 dBi), 2x 5 GHz omni (6 dBi), 2x 6 GHz omni (6 dBi); plus omni Bluetooth antenna
Form Factor: Indoor ceiling/wall access point, 230 x 230 x 50 mm; weight not published
Models: AP34-US (US only) and AP34-WW (outside US)
Curation Review
✔ Pros:Tri-band Wi-Fi 6E with a dedicated 6 GHz radio for high-density and high-performance deployments; Dedicated scanning radio handles RF optimization and security monitoring without reducing client capacity; 5GBASE-T uplink supports multi-gig backhaul on a single RJ45 port; Cloud-managed with automated provisioning, firmware updates, and Marvis AI troubleshooting; Built-in Bluetooth asset visibility without separate beacons; Backward compatible with legacy 802.11a/b/g/n/ac clients
✘ Cons:Client capacity (max associated clients) is not published by Juniper; Full PoE performance requires 802.3bt, and 802.3at or 802.3af operation is reduced; Only one uplink port, with no secondary wired port for bridging or aggregation; Internal antennas only, with no external antenna option; Not intended for deployments needing advanced location services; Region-locked SKUs (AP34-US vs AP34-WW); Full cloud features depend on Juniper Mist subscription licensing; US street prices (about $1,130 to $1,340) sit well below the $1,615 MSRP, and some retailers show much lower WW-SKU prices that may be outliers