Stacking Support: Not listed in official specifications
Packet Buffer: 2 MB
VLANs: 1,000
MAC Address Table: 32,000
IPv4 Static Routes: 256
Access Lists: 128 IPv4, 128 MAC
Form Factor: 1U rack mount, 442.4 x 400 x 44 mm
Weight: 6.2 kg (13.7 lb) without mounting brackets
Power Supply: Internal AC/DC 870W, universal 100-240V AC, DC input for redundant power (RPS)
Max Power Consumption: 100W excluding PoE output; 820W including PoE output
Management Requirement: UniFi Network 8.0.24 or later
Display: 1.3 inch touchscreen LCM
Operating Temperature: -5 to 40u00b0C (23 to 104u00b0F)
Curation Review
✔ Pros:Full 720W PoE budget with 64W PoE++ on 16 of the 48 copper ports, suited to high-power devices; 16 multi-gigabit 2.5GbE ports for Wi-Fi 6/7 access points and high-speed endpoints; Layer 3 routing (inter-VLAN, static routes, DHCP relay) without a separate router; 4x 10G SFP+ uplinks for aggregation or fibre; 224 Gbps switching capacity and 167 Mpps forwarding rate; centralized management through UniFi Network with a touchscreen display; rack-mountable 1U form factor with redundant DC power input
✘ Cons:High price relative to smaller UniFi switches, with US prices roughly $1,300 to $1,500 at major sellers; requires UniFi Network 8.0.24 or later, so it is tied to the UniFi ecosystem; 720W total PoE budget can be exhausted if all 48 ports draw high power, so per-port budgeting is needed; 6.2 kg weight and full-depth chassis require a sturdy rack; stacking support is not listed in official specifications, which limits scaling as a single logical unit; fan noise is not specified, which matters for non-data-centre installs