Name: Ubiquiti USW Pro Max 24 PoE
Brand: Ubiquiti

Ubiquiti USW Pro Max 24 PoE

★ 3.6 Value Score

Switching Capacity: 112 Gbps
Total Non-Blocking Throughput: 56 Gbps
Forwarding Rate: 83 Mpps
Ports (breakdown): 16x 1GbE RJ45 (8 PoE+, 8 PoE++); 8x 2.5GbE RJ45 (all PoE++); 2x 10G SFP+
PoE Budget: 400 W total (PoE 15.4 W, PoE+ 32 W, PoE++ 60 W per port; 16 PoE++ and 8 PoE+ ports)
Layer: L3 (inter-VLAN routing, static routing, DHCP server and relay); LACP, STP/RSTP
Stacking support: Not listed in Ubiquiti's specifications
Packet Buffer: 1.5 MB
MAC Address Table: 16,000
Supported VLANs: 1,000
IPv4 Static Routes: 256
Access Lists: 128 IPv4, 128 MAC
Form Factor: 1U rack mount, 442 x 325 x 44 mm, 5.1 kg
Power Supply: Internal 550 W AC/DC, 100-240 V; DC input for USP RPS backup
Max Power Consumption: 50 W excluding PoE; 450 W including PoE output

✔ Pros: 16 PoE++/PoE+ ports and 8 2.5GbE PoE++ ports provide a mix of multi-gig and PoE for access points and cameras; 400 W PoE budget covers typical AP and camera loads; Layer 3 features (inter-VLAN routing, static routes, DHCP server) let it handle routing without a separate router; 112 Gbps switching capacity and 83 Mpps forwarding rate; 2x 10G SFP+ uplinks; LACP, jumbo frames and 1,000 VLANs; 1.3-inch touchscreen LCD for on-device status
✘ Cons: 400 W PoE budget is less than the 960 W that all 16 PoE++ ports could draw at full 60 W, so simultaneous full-power loads are limited; only 2 SFP+ uplink ports and no documented stacking; 1.5 MB packet buffer is small for heavy multi-gig traffic; price is high compared with unmanaged or lower-PoE switches; 1U rack-mount chassis needs a rack; no published fan noise or stacking data, and no independent long-term reviews were found
Est. Price: $799 - $1,022

Choose another switch to compare.

PACKETPERF