PACKETPERF

Primary Device

Cisco Catalyst 9166 Series (CW9166)
Cisco Catalyst 9166 Series (CW9166)
★ 4.2 Value Score

Technical Specifications

  • Wi-Fi Standard: 802.11ax (Wi-Fi 6 / Wi-Fi 6E), backward compatible with 802.11a/b/g/n/ac
  • Spatial Streams (MIMO): 4x4 per radio (12 total across three radios), MU-MIMO
  • Aggregate Throughput: Up to 7.78 Gbps combined 802.11ax PHY rate (4x4 160 MHz on 6 GHz, 4x4 80 MHz on 5 GHz, 4x4 20 MHz on 2.4 GHz); per-radio rate table not published
  • Radios (bands): 3 radios: 2.4 GHz (4x4), 5 GHz (4x4), 6 GHz LPI (4x4); dual-band XOR radio can shift capacity between 6 GHz and a secondary 5 GHz radio; BLE 5.1 radio
  • Uplink Port Speed: 1x multigigabit RJ-45 (100M / 1G / 2.5G / 5G); plus console port and USB 2.0
  • Max Clients: Not stated in Cisco datasheet
  • PoE Requirement: 802.3bt (UPOE) 30.5 W for full functionality; 802.3at 25.5 W (radios 4x4, 5 Gbps link, USB disabled); 802.3af 14.0 W for staging only with all radios off; DC input 54V (MA-PWR-50WAC)

Curation Review

  • ✔ Pros: Wi-Fi 6E tri-radio design with 6 GHz band support; 4x4 on all three radios for 12 spatial streams; XOR radio flexibly reallocates capacity between 6 GHz and 5 GHz; full 802.3bt/UPOE power support with 5 Gbps uplink; flexible management via on-premises Catalyst 9800 controllers (IOS XE) or Meraki cloud; built-in environmental sensors and BLE 5.1 for location and IoT use cases; CleanAir Pro, Zero Wait DFS, and Trust Anchor secure boot; variants for omni-directional (CW9166I) and high-ceiling directional (CW9166D1) deployments
  • ✘ Cons: Maximum throughput applies only to the 6 GHz radio in ideal conditions; 6 GHz is disabled in countries without authorization, reducing it to dual 5 GHz operation; 802.3af power only supports staging with radios off, so full performance needs 802.3at or bt; single multigigabit uplink port with no secondary wired port; max client count not published; street pricing varies widely by seller and configuration, and reseller prices sit well above some listings; requires a Catalyst 9800 controller or Meraki licensing to unlock full management features
  • Est. Price: $1,229 - $2,338

Compare Against

Cisco Catalyst 9178I (CW9178I)
Cisco Catalyst 9178I (CW9178I)
★ 0.0 Value Score

Technical Specifications

  • Wi-Fi Standard: 802.11be (Wi-Fi 7); also 802.11ax/ac/n and a/b/g
  • Spatial Streams (MIMO): 4x4:4SS on each client radio (2.4 GHz, 5 GHz, 6 GHz); quad-radio mode adds a second 4x4 5 GHz radio
  • Aggregate Throughput: Up to 24 Gbps PHY aggregate in quad-radio mode (Cisco datasheet; Meraki lists 24 Gbps as a chipset maximum that may exceed 802.11be operation); up to 18 Gbps in tri-radio mode
  • Radios (bands): Default tri-radio: 2.4 GHz 4x4 (20 MHz), 5 GHz 4x4 (160 MHz), 6 GHz 4x4 (320 MHz). Quad-radio via Flexible Radio Assignment adds a second 5 GHz radio. Also: dedicated tri-band scanning radio (Air Marshal WIDS/WIPS), integrated IoT radio, BLE 5.3 (upgradable to 6.0), integrated UWB radio (listed on Cisco datasheet; ordering line references UWB), built-in GNSS/GPS
  • Uplink Port Speed: 2x multigigabit RJ-45 (dual 10G mGig): 100M/1G/2.5G/5G/10G; Cat6/Cat6A required for 10 Gbps
  • Max Clients: Not stated in Cisco or Meraki datasheets
  • PoE Requirement: 802.3bt (UPOE, Class 6, 47 W max) for full operation; 802.3at (25.5 W) supported with reduced functionality; 802.3af (13.95 W) for staging only; optional Cisco Power Injector CW-INJ-8; USB 2.0 at 9 W
  • Layer (L2/L3): Not applicable (wireless access point)
  • Form Factor: Indoor AP, 9.9 x 9.9 x 2.0 in (251 x 251 x 51 mm) excluding mount plate/brackets, 4.1 lb (1.87 kg); desktop, ceiling, and wall mountable
  • Datasheet Updated: August 10, 2026 (Cisco)

Curation Review

  • ✔ Pros: Wi-Fi 7 (802.11be) with 4x4 on all client radios; Tri-band with optional quad-radio mode for extra 5 GHz capacity; Dedicated scanning radio for WIDS/WIPS and RF visibility without sacrificing client radios; Dual 10G mGig uplinks with port and power redundancy; Integrated IoT, BLE, GNSS, and UWB radios in one unit; Supports both Catalyst Wireless LAN Controller and Meraki cloud deployments
  • ✘ Cons: Requires 802.3bt (UPOE) PoE for full operation, so many legacy switches cannot power it fully; Full 10G uplink needs Cat6/Cat6A cabling; Aggregate 24 Gbps figure is a PHY maximum rather than real-world throughput; Embedded wireless controller (EWC) mode is not supported; Max client count is not published in the datasheets; Higher price than Wi-Fi 6E alternatives, with list price around $3,896 and street prices of about $2,190 to $2,620 depending on retailer and SKU (-CFG vs -RTG)
  • Est. Price: $2,188 - $2,619

Popular Comparisons

Cisco Catalyst 9166 Series (CW9166) vs Ubiquiti UniFi U7 Pro Cisco Catalyst 9166 Series (CW9166) vs Ubiquiti U6 Pro Cisco Catalyst 9166 Series (CW9166) vs Cisco Catalyst 9178i Cisco Catalyst 9166 Series (CW9166) vs Cisco Catalyst 9176I (CW9176I) Cisco Catalyst 9166 Series (CW9166) vs Ubiquiti U6-Pro