PoE Budget: 400 W total (PoE+ 802.3at, up to 32 W per port by PSE)
Max Power Consumption: 60 W excluding PoE output; 460 W including PoE output
Layer: Layer 3
Stacking support: Not listed in official specifications
MAC Address Table: 16,000 entries
Packet Buffer: 2 MB
Jumbo Frames: Supported
Form Factor: 1U rack-mount, 442 x 325 x 44 mm
Weight: 5.1 kg (11.3 lb) without brackets
Operating Temperature: -5 to 40 C
Curation Review
✔ Pros:Twelve 2.5GbE PoE+ ports suit multi-gigabit Wi-Fi 6 access points; 400 W PoE budget covers many PoE+ devices at once; Layer 3 managed switch with 124 Gbps switching capacity and 2 MB packet buffer; Two 10G SFP+ uplinks for aggregation or backbone links; Jumbo frame support and 16,000-entry MAC table; Managed through the UniFi controller ecosystem
✘ Cons:Ubiquiti lists this model as Vintage, so it may be superseded and harder to source with full warranty; PoE is limited to 802.3at PoE+ (30 W class), with no PoE++ for U7/E7-class APs; Total PoE budget of 400 W can be exhausted quickly with high-power PoE+ cameras or APs; Heavy for its class at 5.1 kg and uses 60 W before PoE load; Official spec sheet does not list stacking support, fan noise or warranty terms; Not enough independent testing found to verify real-world forwarding rates or Layer 3 routing performance