Ubiquiti Pro Max Aggregation (USW-Pro-Max-Aggregation)
★ 5.0 Value Score
Technical Specifications
Switching Capacity: 760 Gbps
Forwarding Rate: 565 Mpps
Ports: 28 x 10G SFP+ (10G/1G) + 4 x 25G SFP28 (25G/10G/1G)
PoE Budget: N/A (non-PoE switch)
Layer: L3 (Layer 2 features also supported)
Stacking: Not listed
Non-blocking Throughput: 380 Gbps
Max Power Consumption: 100 W
Power Input: Universal AC 100-240 V; DC input for RPS backup
Form Factor: 1U rack-mount (442 x 325 x 44 mm)
Weight: 4.6 kg without brackets
Curation Review
✔ Pros:760 Gbps switching capacity and 565 Mpps forwarding rate for aggregation duty; 28 x 10G SFP+ plus 4 x 25G SFP28 uplink ports; Layer 3 switching with Layer 2 features; DC input for redundant power backup; compact 1U rack form factor
✘ Cons:No PoE, so it can't power APs or cameras directly; no stacking listed; not in stock on Ubiquiti's US store (marked 'No restock date yet'); 100 W power draw is high for a non-PoE 1U switch; price is above many 10G-only alternatives
Est. Price:
$899 - $1,048
Compare Against
Ubiquiti Pro Max 24 PoE
★ 3.5 Value Score
Technical Specifications
Switching Capacity: 112 Gbps
Total Non-Blocking Throughput: 56 Gbps
Forwarding Rate: 83 Mpps (83.328 Mpps per Ubiquiti datasheet)
Ports (breakdown): 1 x 1GbE RJ45 (non-PoE); 16 x 1GbE RJ45 (8 PoE+ 802.3at, 8 PoE++ 802.3bt); 8 x 2.5GbE RJ45 (all PoE++); 2 x 10G SFP+. Total: 24 PoE-capable ports plus 1 non-PoE RJ45 and 2 SFP+ uplinks
✔ Pros:Eight 2.5GbE PoE++ (60W) ports plus eight 1GbE PoE++ ports suit high-power devices such as Wi-Fi 6E/7 APs and PTZ cameras; Layer 3 with inter-VLAN routing, static routing and DHCP server removes the need for a separate router on small networks; 112 Gbps switching capacity and 56 Gbps non-blocking throughput support full-rate operation on most ports; Two 10G SFP+ uplinks provide a clear path to aggregation or core switches; 1U rack form factor with 1.3-inch touchscreen and Etherlighting; NDAA compliant, which suits government and regulated buyers
✘ Cons:The 400W PoE budget cannot power every port at its 60W maximum (16 PoE++ plus 8 PoE+ ports can request about 1,216W), so the switch must be sized by per-device load; No stacking or clustering support, so scaling beyond one unit means separate management and uplinks; 256 IPv4 static routes and a 16,000-entry MAC table limit larger L3 deployments; Uplinks are 10G SFP+ only, with no 25G option on the official spec; Requires UniFi Network 8.0.24 or later; Price is higher than many non-UniFi 24-port PoE switches, and retailers quote widely varying prices; No independent hands-on review or measured PoE performance data was found in the sources