Stacking support: Not confirmed; no physical stacking documented in sources reviewed
MAC Address Table Size: 32,000 entries
Packet Buffer Size: 2 MB
Form Factor: 1U rack-mountable, 442 x 325 x 44 mm, 5.1 kg without brackets
Management: UniFi Network 8.0.24+
Operating Temperature: -5 to 40u00b0C (23 to 104u00b0F)
Certifications: CE, FCC, IC (one listing states NDAA compliant)
Curation Review
✔ Pros:Layer 3 switching in a 24-port 1U chassis; 8x 2.5GbE PoE++ ports for multi-gig wireless and workstation uplinks; 400W total PoE budget with up to 60W per port; 2x 10G SFP+ uplinks; 112 Gbps switching capacity and 56 Gbps non-blocking throughput; managed centrally through UniFi Network; list price of $799 USD from Ubiquiti's US store is competitive for L3 PoE++ hardware
✘ Cons:400W total PoE budget is limited if many high-power PoE++ devices are connected at once; No physical stacking documented, so scaling beyond one unit needs separate management; Port breakdown is described inconsistently across retailer listings, so the official Ubiquiti datasheet should be checked; Reseller prices vary widely (about $799 to $951 USD, plus higher regional prices); Independent hands-on reviews with measured performance were not found; Requires UniFi Network 8.0.24 or later for management
Est. Price:
$799 - $951
Compare Against
Ubiquiti Pro Max 24 PoE
★ 3.5 Value Score
Technical Specifications
Switching Capacity: 112 Gbps
Total Non-Blocking Throughput: 56 Gbps
Forwarding Rate: 83 Mpps (83.328 Mpps per Ubiquiti datasheet)
Ports (breakdown): 1 x 1GbE RJ45 (non-PoE); 16 x 1GbE RJ45 (8 PoE+ 802.3at, 8 PoE++ 802.3bt); 8 x 2.5GbE RJ45 (all PoE++); 2 x 10G SFP+. Total: 24 PoE-capable ports plus 1 non-PoE RJ45 and 2 SFP+ uplinks
✔ Pros:Eight 2.5GbE PoE++ (60W) ports plus eight 1GbE PoE++ ports suit high-power devices such as Wi-Fi 6E/7 APs and PTZ cameras; Layer 3 with inter-VLAN routing, static routing and DHCP server removes the need for a separate router on small networks; 112 Gbps switching capacity and 56 Gbps non-blocking throughput support full-rate operation on most ports; Two 10G SFP+ uplinks provide a clear path to aggregation or core switches; 1U rack form factor with 1.3-inch touchscreen and Etherlighting; NDAA compliant, which suits government and regulated buyers
✘ Cons:The 400W PoE budget cannot power every port at its 60W maximum (16 PoE++ plus 8 PoE+ ports can request about 1,216W), so the switch must be sized by per-device load; No stacking or clustering support, so scaling beyond one unit means separate management and uplinks; 256 IPv4 static routes and a 16,000-entry MAC table limit larger L3 deployments; Uplinks are 10G SFP+ only, with no 25G option on the official spec; Requires UniFi Network 8.0.24 or later; Price is higher than many non-UniFi 24-port PoE switches, and retailers quote widely varying prices; No independent hands-on review or measured PoE performance data was found in the sources