Ubiquiti Switch Pro Max 24 PoE vs Cisco Nexus 9300-GX2: Specs & Price Comparison

Ubiquiti Switch Pro Max 24 PoE

★ 4.1 Value Score

Switching Capacity: 112 Gbps
Non-Blocking Throughput: 56 Gbps
Forwarding Rate: 83.3 Mpps
Ports: 24 total: 8x 2.5GbE PoE++, 8x 1GbE PoE++, 8x 1GbE PoE+, plus 2x 10G SFP+ uplinks
PoE Budget: 400W total (max 60W per port)
Layer: L3
Stacking support: Not confirmed; no physical stacking documented in sources reviewed
MAC Address Table Size: 32,000 entries
Packet Buffer Size: 2 MB
Form Factor: 1U rack-mountable, 442 x 325 x 44 mm, 5.1 kg without brackets
Management: UniFi Network 8.0.24+
Operating Temperature: -5 to 40u00b0C (23 to 104u00b0F)
Certifications: CE, FCC, IC (one listing states NDAA compliant)

✔ Pros: Layer 3 switching in a 24-port 1U chassis; 8x 2.5GbE PoE++ ports for multi-gig wireless and workstation uplinks; 400W total PoE budget with up to 60W per port; 2x 10G SFP+ uplinks; 112 Gbps switching capacity and 56 Gbps non-blocking throughput; managed centrally through UniFi Network; list price of $799 USD from Ubiquiti's US store is competitive for L3 PoE++ hardware
✘ Cons: 400W total PoE budget is limited if many high-power PoE++ devices are connected at once; No physical stacking documented, so scaling beyond one unit needs separate management; Port breakdown is described inconsistently across retailer listings, so the official Ubiquiti datasheet should be checked; Reseller prices vary widely (about $799 to $951 USD, plus higher regional prices); Independent hands-on reviews with measured performance were not found; Requires UniFi Network 8.0.24 or later for management
Est. Price: $799 - $951

Cisco Nexus 9300-GX2

★ 3.3 Value Score

Switching Capacity: Family: 9364D-GX2A 51.2 Tbps (2RU); 9348D-GX2A 38.4 Tbps (2RU); 9332D-GX2B 25.6 Tbps (1RU)
Forwarding Rate: Family: 9364D-GX2A 8.35 Bpps max; 9348D-GX2A 8.35 Bpps max; 9332D-GX2B 4.17 Bpps max
Ports (breakdown): 9364D-GX2A: 64x 400G QSFP-DD + 2x 1/10G SFP+; 9348D-GX2A: 48x 400G QSFP-DD + 2x 1/10G SFP+; 9332D-GX2B: 32x 400G QSFP-DD + 2x 1/10G SFP+. All models: 1x 10/100/1000BASE-T and 1x 1G SFP management, 1 RS-232 console, 1 USB. Each 400G port breaks out to 4x10G, 4x25G, 4x50G, 4x100G or 2x200G; native 200G, 100G and 40G supported
PoE Budget: N/A (data center fixed switch, no PoE)
Layer: L3 (Layer 2 and Layer 3; NX-OS or ACI spine/leaf modes)
Stacking support: No stacking; multipathing via vPC and VXLAN fabric (128-way ECMP cited)
Packet Buffer: 120 MB (all models)
MACsec: Wire-rate on port subsets: 9364D-GX2A first 16 ports; 9348D-GX2A all 48 ports; 9332D-GX2B last 8 ports
Power (typical / max): 9364D-GX2A and 9348D-GX2A 1380 W / 3124 W with 3200W AC PSUs; 9332D-GX2B 638 W / 1442 W with 1500W AC PSUs
Form Factor: 2RU (9364D-GX2A, 9348D-GX2A); 1RU (9332D-GX2B)
Routing Protocols: BGP, OSPF, IS-IS, EIGRP, RIPv2, PIM-SM, SSM, MSDP, Segment Routing (SR and SRv6)
Forwarding Table Scale (GX2A / GX2B): IPv4 LPM 1M / 2M; IPv6 LPM 500K / 1M; MAC entries 500K / 1M; multicast routes 256K; up to 2M shared forwarding entries
AI/ML Features: PFC, ECN, ETS, DCBX, WRED, AFD with ETRAP, DPP
Operating Temperature: 0-40 C (intake); 0-28 C (exhaust on 9332D-GX2B)

✔ Pros: Very high density of 400G ports in a compact fixed chassis (up to 64x 400G in 2RU on the 9364D-GX2A); Full-duplex switching capacity up to 51.2 Tbps with 8.35 Bpps forwarding on the largest models; Flexible port breakouts (4x10G, 4x25G, 4x50G, 4x100G, 2x200G) allow one platform to serve mixed-speed fabrics; Wire-rate MACsec on selected ports and AI/ML-ready congestion features (PFC, ECN, AFD); Supports both NX-OS and ACI (spine and leaf) modes with deep L3 routing and segment routing (SR, SRv6); Large forwarding tables on GX2B models (2M IPv4 LPM and host entries) and 120 MB packet buffer
✘ Cons: No public Cisco list price; pricing requires a sales contact or partner quote, and the reseller prices found vary widely; Optics and transceivers are sold separately and must be checked against the Cisco optics compatibility matrix, which adds significant cost; High power draw on the 2RU models (typical 1380 W, max 3124 W), so power and cooling planning is needed; No stacking, so fabrics rely on vPC or VXLAN designs that add configuration complexity; Only 2x 1/10G SFP+ ports on every model, so legacy 1G/10G access or uplink needs require breakouts or extra hardware; Full-scale 400G port density is aimed at data center and AI fabric deployments, which makes the platform poorly suited to small enterprise or access-layer use
Est. Price: $89,219 - $111,224

PACKETPERF