PACKETPERF

Primary Device

Ubiquiti Switch Pro Max 24 PoE
Ubiquiti Switch Pro Max 24 PoE
★ 4.1 Value Score

Technical Specifications

  • Switching Capacity: 112 Gbps
  • Non-Blocking Throughput: 56 Gbps
  • Forwarding Rate: 83.3 Mpps
  • Ports: 24 total: 8x 2.5GbE PoE++, 8x 1GbE PoE++, 8x 1GbE PoE+, plus 2x 10G SFP+ uplinks
  • PoE Budget: 400W total (max 60W per port)
  • Layer: L3
  • Stacking support: Not confirmed; no physical stacking documented in sources reviewed
  • MAC Address Table Size: 32,000 entries
  • Packet Buffer Size: 2 MB
  • Form Factor: 1U rack-mountable, 442 x 325 x 44 mm, 5.1 kg without brackets
  • Management: UniFi Network 8.0.24+
  • Operating Temperature: -5 to 40u00b0C (23 to 104u00b0F)
  • Certifications: CE, FCC, IC (one listing states NDAA compliant)

Curation Review

  • ✔ Pros: Layer 3 switching in a 24-port 1U chassis; 8x 2.5GbE PoE++ ports for multi-gig wireless and workstation uplinks; 400W total PoE budget with up to 60W per port; 2x 10G SFP+ uplinks; 112 Gbps switching capacity and 56 Gbps non-blocking throughput; managed centrally through UniFi Network; list price of $799 USD from Ubiquiti's US store is competitive for L3 PoE++ hardware
  • ✘ Cons: 400W total PoE budget is limited if many high-power PoE++ devices are connected at once; No physical stacking documented, so scaling beyond one unit needs separate management; Port breakdown is described inconsistently across retailer listings, so the official Ubiquiti datasheet should be checked; Reseller prices vary widely (about $799 to $951 USD, plus higher regional prices); Independent hands-on reviews with measured performance were not found; Requires UniFi Network 8.0.24 or later for management
  • Est. Price: $799 - $951

Compare Against

Cisco Nexus 9300-GX2 (N9K-C9332D-GX2B)
Cisco Nexus 9300-GX2 (N9K-C9332D-GX2B)
★ 3.3 Value Score

Technical Specifications

  • Switching Capacity: 25.6 Tbps (per Cisco datasheet c78-743854 and most resellers; some listings show 12.8 Tbps, likely the -M variant or an older revision)
  • Forwarding Rate: 4.17 Bpps per Cisco datasheet copy (other listings show 5.77 Bpps or 14.4 Bpps; verify against current Cisco PDF)
  • Ports (breakdown): 32x 400G QSFP-DD (also run as 100G/200G, supports 4x100G breakout); 2x 1/10G SFP+; 1x management; 1x console
  • PoE Budget: N/A (no PoE)
  • Layer: L2/L3
  • Stacking support: No (multi-chassis redundancy via vPC)

Curation Review

  • ✔ Pros: 32x 400G QSFP-DD ports in a 1RU chassis gives very high port density; Flexible 100G/200G/400G operation with 4x100G breakout; Full L2/L3 feature set with VXLAN EVPN and optional Cisco ACI support on NX-OS; Large packet buffer (about 120 MB) suits leaf/spine data center and AI/ML fabrics; Strong value per port compared with modular chassis at similar bandwidth
  • ✘ Cons: No PoE and no campus access role, so it is limited to data center and fabric deployments; Requires QSFP-DD optics or DAC/AOC cables, which add significant cost; No stacking, so redundancy depends on vPC or fabric design; Published switching capacity and forwarding rates conflict across Cisco revisions and resellers; Street prices vary widely (about $25k to $78k) and are often third-party or refurbished
  • Est. Price: $25,313 - $77,900

Popular Comparisons

Ubiquiti Switch Pro Max 24 PoE vs Ubiquiti Pro Max Aggregation (USW-Pro-Max-Aggregation) Ubiquiti Switch Pro Max 24 PoE vs Cisco Cisco Catalyst 9200L Ubiquiti Switch Pro Max 24 PoE vs Aruba (HPE) Aruba CX 6200 Ubiquiti Switch Pro Max 24 PoE vs Ubiquiti Enterprise 8 PoE Ubiquiti Switch Pro Max 24 PoE vs Ubiquiti UniFi Pro Max 24 PoE