Mounting / Form Factor: Ceiling or wall mount (mount included); approx. 197 x 35 mm
Management: UniFi Network controller (self-hosted, Cloud Key, or UniFi OS console)
Operating Temperature: -30 to 60 u00b0C
Weatherproofing: Indoor use only
Certifications: CE, FCC, IC
Curation Review
✔ Pros:Full 4x4 MU-MIMO on 5 GHz for high aggregate Wi-Fi 6 throughput (about 5.3 Gbps combined); Supports OFDMA, BSS Coloring, and WPA3 for dense-client efficiency and modern security; Mount hardware included for ceiling or wall installs; Managed centrally through the UniFi controller ecosystem with adoption, firmware updates, and RF tuning; Covers roughly 140 m² (1,500 ft²) per unit per Ubiquiti's rating
✘ Cons:Single 1 GbE uplink port limits backhaul to 1 Gbps, which can bottleneck the 5 GHz radio; No 6 GHz radio, so no Wi-Fi 6E or Wi-Fi 7 capability; Requires 802.3at PoE+ power; some retail units ship without the PoE adapter; Indoor-only (IP54 not rated by Ubiquiti for this model); Price is higher than entry-level Wi-Fi 6 APs and can exceed $180 at some retailers
Est. Price:
$150 - $180
Compare Against
Cisco Catalyst 9178I (CW9178I)
★ 0.0 Value Score
Technical Specifications
Wi-Fi Standard: 802.11be (Wi-Fi 7); also 802.11ax/ac/n and a/b/g
Spatial Streams (MIMO): 4x4:4SS on each client radio (2.4 GHz, 5 GHz, 6 GHz); quad-radio mode adds a second 4x4 5 GHz radio
Aggregate Throughput: Up to 24 Gbps PHY aggregate in quad-radio mode (Cisco datasheet; Meraki lists 24 Gbps as a chipset maximum that may exceed 802.11be operation); up to 18 Gbps in tri-radio mode
Radios (bands): Default tri-radio: 2.4 GHz 4x4 (20 MHz), 5 GHz 4x4 (160 MHz), 6 GHz 4x4 (320 MHz). Quad-radio via Flexible Radio Assignment adds a second 5 GHz radio. Also: dedicated tri-band scanning radio (Air Marshal WIDS/WIPS), integrated IoT radio, BLE 5.3 (upgradable to 6.0), integrated UWB radio (listed on Cisco datasheet; ordering line references UWB), built-in GNSS/GPS
Uplink Port Speed: 2x multigigabit RJ-45 (dual 10G mGig): 100M/1G/2.5G/5G/10G; Cat6/Cat6A required for 10 Gbps
Max Clients: Not stated in Cisco or Meraki datasheets
PoE Requirement: 802.3bt (UPOE, Class 6, 47 W max) for full operation; 802.3at (25.5 W) supported with reduced functionality; 802.3af (13.95 W) for staging only; optional Cisco Power Injector CW-INJ-8; USB 2.0 at 9 W
Layer (L2/L3): Not applicable (wireless access point)
Form Factor: Indoor AP, 9.9 x 9.9 x 2.0 in (251 x 251 x 51 mm) excluding mount plate/brackets, 4.1 lb (1.87 kg); desktop, ceiling, and wall mountable
Datasheet Updated: August 10, 2026 (Cisco)
Curation Review
✔ Pros:Wi-Fi 7 (802.11be) with 4x4 on all client radios; Tri-band with optional quad-radio mode for extra 5 GHz capacity; Dedicated scanning radio for WIDS/WIPS and RF visibility without sacrificing client radios; Dual 10G mGig uplinks with port and power redundancy; Integrated IoT, BLE, GNSS, and UWB radios in one unit; Supports both Catalyst Wireless LAN Controller and Meraki cloud deployments
✘ Cons:Requires 802.3bt (UPOE) PoE for full operation, so many legacy switches cannot power it fully; Full 10G uplink needs Cat6/Cat6A cabling; Aggregate 24 Gbps figure is a PHY maximum rather than real-world throughput; Embedded wireless controller (EWC) mode is not supported; Max client count is not published in the datasheets; Higher price than Wi-Fi 6E alternatives, with list price around $3,896 and street prices of about $2,190 to $2,620 depending on retailer and SKU (-CFG vs -RTG)