Max Clients: 250+ (official Ubiquiti tech specs; some retailers list 300+)
PoE Requirement: PoE powered, 44-57V DC input, 13W max consumption; 802.3af/at not specified by Ubiquiti; no PoE injector in the spec listing
Curation Review
✔ Pros:Wi-Fi 6 with 4x4 MU-MIMO on 5 GHz for good multi-client performance; Aggregate throughput up to 5.3 Gbps across both bands; Low 13W power draw compared with higher-end APs; Works with UniFi Network controller for centralized management; Ceiling or wall mounting with included Pro Mount; Compact, low-profile design (about 197 mm diameter, 35 mm height)
✘ Cons:Only a single 1 GbE uplink, which can bottleneck the 5 GHz radio on fast networks; No 2.5 GbE or multi-gig port; PoE standard not clearly specified, so verify your switch or injector supplies enough power; PoE injector is not included with the US model, which adds cost; Client capacity is lower on the official spec (250+) than some retailer marketing claims (300+); Requires a UniFi controller for full feature use
Est. Price:
$159 - $185
Compare Against
Juniper Networks AP66
★ 0.0 Value Score
Technical Specifications
Wi-Fi Standard: Wi-Fi 7 (802.11be); backward compatible with 802.11a/b/g/n/ac/ax
Spatial Streams (MIMO): 2x2:2 per radio on 2.4, 5 and 6 GHz; SU-MIMO and MU-MIMO
Aggregate Throughput: 9.38 Gbps (reseller figure, roughly the sum of per-band rates of 0.688 + 2.9 + 5.8 Gbps; not an official Juniper aggregate)
Radios (bands): 4 radios: 2.4 GHz, 5 GHz and 6 GHz data radios, plus a dedicated scanning radio; also an IoT radio, Bluetooth omnidirectional antenna and vBLE antenna array
Uplink Port Speed: 1 x RJ-45, 1 GbE per reseller listing (not confirmed on the Juniper datasheet)
Max Clients: Not published in sources reviewed
PoE Requirement: 802.3at (PoE+); 25.5 W required for full functionality
Deployment / Operating Temp: Indoor/outdoor; -40 to 55 C; up to 3,048 m altitude
Curation Review
✔ Pros:Wi-Fi 7 (802.11be) with 802.11ax backward compatibility; Four radios, including a dedicated scanning radio, for continuous RF monitoring and security; Built-in IoT, BLE and vBLE support; Rated for indoor and outdoor deployment across -40 to 55 C; Runs on a single 802.3at PoE+ cable, so no separate power injector is needed; Managed through Juniper Mist cloud
✘ Cons:Single 1 GbE uplink (per reseller listing) may bottleneck the 2x2 radios in high-density use; Full functionality needs 25.5 W, which exceeds 802.3af PoE budgets; Max client count is not published; Mist cloud management typically requires paid subscription licensing; Only 2x2 streams per radio, below 4x4 enterprise Wi-Fi 7 APs; Premium price compared with Wi-Fi 6E and Wi-Fi 6 Juniper models