Max Clients: 250+ (official Ubiquiti tech specs; some retailers list 300+)
PoE Requirement: PoE powered, 44-57V DC input, 13W max consumption; 802.3af/at not specified by Ubiquiti; no PoE injector in the spec listing
Curation Review
✔ Pros:Wi-Fi 6 with 4x4 MU-MIMO on 5 GHz for good multi-client performance; Aggregate throughput up to 5.3 Gbps across both bands; Low 13W power draw compared with higher-end APs; Works with UniFi Network controller for centralized management; Ceiling or wall mounting with included Pro Mount; Compact, low-profile design (about 197 mm diameter, 35 mm height)
✘ Cons:Only a single 1 GbE uplink, which can bottleneck the 5 GHz radio on fast networks; No 2.5 GbE or multi-gig port; PoE standard not clearly specified, so verify your switch or injector supplies enough power; PoE injector is not included with the US model, which adds cost; Client capacity is lower on the official spec (250+) than some retailer marketing claims (300+); Requires a UniFi controller for full feature use
Est. Price:
$159 - $185
Compare Against
Aruba (HPE) Aruba AP-655
★ 3.7 Value Score
Technical Specifications
Wi-Fi Standard: Wi-Fi 6E (802.11ax) with 6 GHz support; backward compatible with 802.11a/b/g/n/ac
Spatial Streams (MIMO): 4x4:4 MU-MIMO with OFDMA per radio (tri-radio)
Aggregate Throughput: 7.8 Gbps combined (HPE rated across 2.4, 5 and 6 GHz radios)
Uplink Port Speed: 2x multigig RJ-45 ports (100M/1G/2.5G/5G); dual 5 GbE with failover or aggregation
Max Clients: 512 concurrent clients; 16 SSIDs
PoE Requirement: 802.3bt Type 3 (PoE Class 4) recommended; 802.3at-only power is not supported for full operation; worst-case draw about 40.3 to 46.5 W
Curation Review
✔ Pros:Tri-radio design with a dedicated 6 GHz radio for Wi-Fi 6E capacity and reduced co-channel interference; 4x4:4 MU-MIMO with OFDMA on each radio supports high-density clients; Two multigig uplinks (up to 5 GbE) with failover or link aggregation avoid the 1 GbE backhaul bottleneck; Rated up to 7.8 Gbps aggregate throughput; Managed through Aruba Central with zero-touch provisioning and WPA3 security
✘ Cons:Requires 802.3bt (PoE++) switch power for full operation, so older 802.3af/at switches are insufficient; Wi-Fi 6E is one generation behind Wi-Fi 7 gear; Higher price than dual-band Wi-Fi 6 APs, at roughly $1,450 to $2,195; Client limit of 512 can be a constraint in very dense venues; Spec figures vary across resellers and datasheet access was limited, so PoE class and throughput should be confirmed against HPE's official datasheet; Regional SKUs (US, RW, TAA, EG) differ in price and compliance