PACKETPERF

Primary Device

Ubiquiti U6 Pro
Ubiquiti U6 Pro
★ 4.4 Value Score

Technical Specifications

  • Wi-Fi Standard: Wi-Fi 6 (802.11ax)
  • Spatial Streams (MIMO): 6 total: 5 GHz 4x4 (DL/UL MU-MIMO); 2.4 GHz 2x2 (UL MU-MIMO)
  • Aggregate Throughput: 5.3 Gbps (combined; 4.8 Gbps 5 GHz BW160 + 573.5 Mbps 2.4 GHz BW40)
  • Radios (bands): Dual-band: 2.4 GHz and 5 GHz
  • Uplink Port Speed: 1x 1 GbE RJ45
  • Max Clients: 250+ (official Ubiquiti tech specs; some retailers list 300+)
  • PoE Requirement: PoE powered, 44-57V DC input, 13W max consumption; 802.3af/at not specified by Ubiquiti; no PoE injector in the spec listing

Curation Review

  • ✔ Pros: Wi-Fi 6 with 4x4 MU-MIMO on 5 GHz for good multi-client performance; Aggregate throughput up to 5.3 Gbps across both bands; Low 13W power draw compared with higher-end APs; Works with UniFi Network controller for centralized management; Ceiling or wall mounting with included Pro Mount; Compact, low-profile design (about 197 mm diameter, 35 mm height)
  • ✘ Cons: Only a single 1 GbE uplink, which can bottleneck the 5 GHz radio on fast networks; No 2.5 GbE or multi-gig port; PoE standard not clearly specified, so verify your switch or injector supplies enough power; PoE injector is not included with the US model, which adds cost; Client capacity is lower on the official spec (250+) than some retailer marketing claims (300+); Requires a UniFi controller for full feature use
  • Est. Price: $159 - $185

Compare Against

Aruba (HPE) AP-735
Aruba (HPE) AP-735
★ 3.5 Value Score

Technical Specifications

  • Wi-Fi Standard: Wi-Fi 7 (IEEE 802.11be), backward compatible with 802.11ax/ac/a/b/g/n; Bluetooth 5.4 LE and Zigbee radio
  • Spatial Streams (MIMO): 2x2 MU-MIMO on each of the 3 radios (2.4 GHz, 5 GHz, 6 GHz)
  • Aggregate Throughput: 9.3 Gbps tri-radio aggregate (HPE rating)
  • Radios (bands): Tri-radio: 2.4 GHz, 5 GHz, 6 GHz (concurrent), plus dedicated BLE/Zigbee radio
  • Uplink Port Speed: 2x 5GBASE-T multigig RJ-45 (auto-negotiating 100 Mbps / 1 / 2.5 / 5 Gbps), 1x USB-C console/USB, 2x USB
  • Max Clients: 512 associated clients per radio; up to 16 BSSIDs per radio
  • PoE Requirement: 802.3bt (Class 5, 40 W) for unrestricted operation; 802.3at (Class 4, 25.5 W) runs in restricted mode; 802.3af (Class 3) supports staging only. Worst-case draw 24 W on PoE (36 W with USB devices); DC power 20 W (31 W with USB)
  • Form Factor: Indoor campus access point, internal antennas, ceiling or wall mount
  • Product Status: End of life per some reseller listings (SHI); verify availability before purchase

Curation Review

  • ✔ Pros: Wi-Fi 7 tri-band radio with 9.3 Gbps aggregate throughput at a lower price than the AP-755; Two 5GBASE-T multigig uplinks support 2.5 and 5 Gbps wired backhaul without a switch upgrade; Supports up to 512 clients per radio, suitable for dense campus or office deployments; Fully managed through HPE Aruba Central or AOS 10 with the same feature set as the 730 Series; Low worst-case power draw (24 W PoE) fits within 802.3bt Class 5 budgets; Dedicated BLE/Zigbee radio enables IoT and location services
  • ✘ Cons: Only 2x2 spatial streams per band, so per-client throughput and capacity lag 4x4 Wi-Fi 7 APs like the AP-755; Uplink is multigig but not 10GbE, which limits throughput on high-density or 6 GHz heavy deployments; Requires 802.3bt Class 5 PoE for unrestricted operation, so older 802.3at switches disable USB and run in restricted mode; Some reseller listings show it as end-of-life, so availability and support may be limited; Pricing varies widely by region and SKU (for example S1G42A vs S0H13A) and sellers may show discounts from the US list price of $1,995
  • Est. Price: $1,250 - $1,995

Popular Comparisons

Ubiquiti U6 Pro vs Ubiquiti UniFi U7 Pro Ubiquiti U6 Pro vs Cisco Catalyst 9178i Ubiquiti U6 Pro vs Cisco Catalyst 9176I (CW9176I) Ubiquiti U6 Pro vs Cisco Catalyst 9166 Series (CW9166) Ubiquiti U6 Pro vs Ubiquiti U6-Pro