Max Clients: 250+ (official Ubiquiti tech specs; some retailers list 300+)
PoE Requirement: PoE powered, 44-57V DC input, 13W max consumption; 802.3af/at not specified by Ubiquiti; no PoE injector in the spec listing
Curation Review
✔ Pros:Wi-Fi 6 with 4x4 MU-MIMO on 5 GHz for good multi-client performance; Aggregate throughput up to 5.3 Gbps across both bands; Low 13W power draw compared with higher-end APs; Works with UniFi Network controller for centralized management; Ceiling or wall mounting with included Pro Mount; Compact, low-profile design (about 197 mm diameter, 35 mm height)
✘ Cons:Only a single 1 GbE uplink, which can bottleneck the 5 GHz radio on fast networks; No 2.5 GbE or multi-gig port; PoE standard not clearly specified, so verify your switch or injector supplies enough power; PoE injector is not included with the US model, which adds cost; Client capacity is lower on the official spec (250+) than some retailer marketing claims (300+); Requires a UniFi controller for full feature use
Est. Price:
$159 - $185
Compare Against
Juniper Networks AP34
★ 3.4 Value Score
Technical Specifications
Wi-Fi Standard: Wi-Fi 6E (802.11ax) on three data radios; backward compatible with 802.11a/b/g/n/ac
Spatial Streams (MIMO): 2x2 MIMO (2 spatial streams) per data radio
Radios (bands): 3 simultaneous 802.11ax data radios (2.4 GHz, 5 GHz, 6 GHz) plus 1 dedicated tri-band scanning radio for RRM and security
Uplink Port Speed: 1 x Ethernet0 RJ45 port, 100/1000/2500/5000BASE-T (802.3bz)
Max Clients: Not published by Juniper
PoE Requirement: 802.3at or 802.3bt PoE (powered device); boots in 802.3af mode; reduced functionality on 802.3at/bt; max power draw not published
Antennas: Internal: 2x 2.4 GHz omni (4 dBi), 2x 5 GHz omni (6 dBi), 2x 6 GHz omni (6 dBi); plus omni Bluetooth antenna
Form Factor: Indoor ceiling/wall access point, 230 x 230 x 50 mm; weight not published
Models: AP34-US (US only) and AP34-WW (outside US)
Curation Review
✔ Pros:Tri-band Wi-Fi 6E with a dedicated 6 GHz radio for high-density and high-performance deployments; Dedicated scanning radio handles RF optimization and security monitoring without reducing client capacity; 5GBASE-T uplink supports multi-gig backhaul on a single RJ45 port; Cloud-managed with automated provisioning, firmware updates, and Marvis AI troubleshooting; Built-in Bluetooth asset visibility without separate beacons; Backward compatible with legacy 802.11a/b/g/n/ac clients
✘ Cons:Client capacity (max associated clients) is not published by Juniper; Full PoE performance requires 802.3bt, and 802.3at or 802.3af operation is reduced; Only one uplink port, with no secondary wired port for bridging or aggregation; Internal antennas only, with no external antenna option; Not intended for deployments needing advanced location services; Region-locked SKUs (AP34-US vs AP34-WW); Full cloud features depend on Juniper Mist subscription licensing; US street prices (about $1,130 to $1,340) sit well below the $1,615 MSRP, and some retailers show much lower WW-SKU prices that may be outliers
