Max Clients: 250+ (official Ubiquiti tech specs; some retailers list 300+)
PoE Requirement: PoE powered, 44-57V DC input, 13W max consumption; 802.3af/at not specified by Ubiquiti; no PoE injector in the spec listing
Curation Review
✔ Pros:Wi-Fi 6 with 4x4 MU-MIMO on 5 GHz for good multi-client performance; Aggregate throughput up to 5.3 Gbps across both bands; Low 13W power draw compared with higher-end APs; Works with UniFi Network controller for centralized management; Ceiling or wall mounting with included Pro Mount; Compact, low-profile design (about 197 mm diameter, 35 mm height)
✘ Cons:Only a single 1 GbE uplink, which can bottleneck the 5 GHz radio on fast networks; No 2.5 GbE or multi-gig port; PoE standard not clearly specified, so verify your switch or injector supplies enough power; PoE injector is not included with the US model, which adds cost; Client capacity is lower on the official spec (250+) than some retailer marketing claims (300+); Requires a UniFi controller for full feature use
Est. Price:
$159 - $185
Compare Against
Ubiquiti U7 Pro Max
★ 4.0 Value Score
Technical Specifications
Wi-Fi Standard: Wi-Fi 7 (802.11be)
Spatial Streams (MIMO): 8 total: 2x2 DL/UL MU-MIMO on 2.4 GHz, 4x4 DL/UL MU-MIMO on 5 GHz, 2x2 DL/UL MU-MIMO on 6 GHz
Aggregate Throughput: Approx. 15 Gbps theoretical (derived by summing per-band peak PHY rates: 5.8 Gbps 6 GHz + 8.6 Gbps 5 GHz + 688 Mbps 2.4 GHz; not an official Ubiquiti aggregate figure)
Radios (bands): 3 bands: 2.4 GHz, 5 GHz, 6 GHz (6 GHz usable only in regions where permitted); up to 8 BSSIDs per radio
Uplink Port Speed: 1 x 1/2.5 GbE RJ45
Max Clients: 500+ (official)
PoE Requirement: PoE+ (44-57V DC input, 25W max power consumption); official page does not name 802.3at/bt explicitly and does not state whether a PoE injector is included
Coverage Area: 160 m2 (1,750 ft2)
Form Factor: Ceiling or wall mount (Pro Mount included), 206 mm diameter x 46 mm, 680 g
Price Basis: US list price $279.00 on store.ui.com; the same page also shows $307.00 labeled 'Surcharge incl.' (unexplained), which is used as price_max. Third-party listings vary widely, and one AU reseller listing shows $588 (likely AUD, excluded)
Curation Review
✔ Pros:Tri-band Wi-Fi 7 with 6 GHz support for high-density and low-latency environments; 8 spatial streams with 4x4 on 5 GHz for strong capacity; 2.5 GbE uplink above standard gigabit for wired backhaul; 500+ client capacity; dedicated spectral scanning engine for interference detection; PoE+ single-cable deployment at 25W; included mounting hardware for ceiling or wall; competitive US list price of $279 for a tri-band Wi-Fi 7 AP
✘ Cons:Single 2.5 GbE port with no 10 GbE option for high-throughput uplinks; PoE+ (25W) power budget limits use of higher-power features compared with 802.3bt-class APs; 6 GHz availability is restricted to approved countries; uplink and 2.4 GHz are limited compared with 5 GHz and 6 GHz capacity; PoE injector inclusion not stated; third-party pricing and availability vary significantly, and some listings show stock as sold out
