Forwarding Rate: 59.52 Mpps (Ubiquiti tech specs list 60 Mpps)
Non-Blocking Throughput: 40 Gbps
Ports (breakdown): 8 x 2.5GbE RJ45 (all PoE+; 2.5G/1G/100M/10M) + 2 x 10G SFP+ (10G/1G)
PoE Budget: 120W total PoE; 802.3af/at (PoE+) only, up to 32W per port
Layer: L3 (managed)
Stacking Support: Not stated in official specs
Packet Buffer: 1.5 MB
MAC Address Table: 16,000 entries
Power Consumption: 30W excluding PoE; 150W including PoE output
Form Factor: Compact desktop, wall-mount kit included
Dimensions: 200 x 248 x 44 mm
Management Display: 1.3-inch color LCM touchscreen
Product Status: Listed as 'Enterprise 8 PoE (Vintage)' on Ubiquiti's store; no official replacement or EOL announcement found
Curation Review
✔ Pros:Eight 2.5GbE PoE+ ports suit multi-gig Wi-Fi 6 access points and desktop devices; Layer 3 managed feature set at a low price for the class; 80 Gbps switching capacity and 59.52 Mpps forwarding rate cover small-office and branch loads; Two 10G SFP+ uplinks allow 10G backhaul or fiber links; Compact desktop form factor with wall-mount kit and LCM touchscreen for local status; 120W PoE budget is enough for several PoE+ access points or cameras
✘ Cons:Only 802.3af/at PoE+ (max 32W per port), so it cannot power PoE++ devices such as Ubiquiti's U7/E7 access points; Product is listed as Vintage with no official successor named, so long-term availability and firmware support are uncertain; 120W total PoE budget limits how many high-draw devices can be powered at once; Only two SFP+ uplinks and no stacking support, which limits scaling; Price varies widely across resellers ($479 on Ubiquiti's US store, up to about $688 or more at third-party sellers)
PoE Budget: 8P 120 W (PoE+, 30 W/port); 12P 240 W (PoE+); 12MP 240 W (PoE++, 60 W/port); 24P 370 W (PoE+); 24MP 480 W (PoE++); 48P 740 W (PoE+); 48MP 960 W (PoE++, 60 W default); 12T/24T/48T non-PoE
Layer: L2/L3 (vendor describes a full Layer 2 and Layer 3 feature set; licensing tier not verified)
Stacking support: Virtual Chassis over 10GbE SFP+ VC ports (2 per model on 12-, 24- and 48-port models; 8P ports 2-3 convertible to VC via CLI). VC is not supported with 10GBASE-T transceivers in VC ports
MAC Addresses: 32,000 per system; MAC limiting per port and per VLAN
✔ Pros:Full 1GbE access with PoE+ and PoE++ options across 8 to 48 ports; MP models add 2.5GbE multigig ports for Wi-Fi 6/6E/7 access points; 1G/10G SFP+ uplinks and VC ports; Virtual Chassis stacking for unified management; Fanless 8P and 12-port models suit quiet or small-footprint installs; Layer 2 and Layer 3 feature set; Perpetual PoE keeps powered devices running during switch reboots; 32,000 MAC addresses with per-port and per-VLAN MAC limiting
✘ Cons:Published switching capacity and forwarding rate are not confirmed for every model (24MP forwarding rate unclear); VC requires 10GbE SFP+ and is not supported with 10GBASE-T transceivers; 8P has only two SFP+ ports, and only ports 2-3 can become VC ports; Fixed internal PSU with no redundancy option; Layer 3 licensing tier and feature details were not verified against the official datasheet; Prices vary widely by reseller and configuration, and some listings are discounted from list price