Forwarding Rate: 38.69 Mpps (some listings round to 39 Mpps)
Non-Blocking Throughput: 26 Gbps
Ports: 24 x 10/100/1000 Mbps RJ45 (16 of them 802.3at PoE+); 2 x 1G SFP uplink
PoE Budget: 95 W total (some listings state 92 W); up to 32 W per port
PoE Standard: 802.3af/at (PoE+)
Layer: L2 managed (some listings say L2/L3 with static routes)
Stacking Support: Not documented in sources reviewed
Max Power Consumption (excl. PoE): 25 W
Power Supply: Internal 120 W
Form Factor: 1U rack-mountable
Curation Review
✔ Pros:Sixteen 802.3at PoE+ ports with a 95 W budget suit access points, cameras and phones; 52 Gbps switching capacity covers 24 gigabit ports at line rate; Two SFP uplink ports allow fiber or 1G SFP module uplinks; Managed through the UniFi Network controller with VLAN, QoS and port-level controls; Low 25 W draw excluding PoE output keeps baseline power costs down; Price sits well below enterprise PoE switches
✘ Cons:Uplinks are 1G SFP only, with no 10G SFP+ option; Only 16 of 24 ports support PoE, and the 95 W total budget limits high-draw PoE loads; Layer 2 focus, so routing features are limited compared with L3 switches; No stacking documented; Independent lab throughput testing was not found, so performance relies on vendor figures; Retail prices vary widely across sellers and currencies
Stacking support: Not confirmed; no physical stacking documented in sources reviewed
MAC Address Table Size: 32,000 entries
Packet Buffer Size: 2 MB
Form Factor: 1U rack-mountable, 442 x 325 x 44 mm, 5.1 kg without brackets
Management: UniFi Network 8.0.24+
Operating Temperature: -5 to 40u00b0C (23 to 104u00b0F)
Certifications: CE, FCC, IC (one listing states NDAA compliant)
Curation Review
✔ Pros:Layer 3 switching in a 24-port 1U chassis; 8x 2.5GbE PoE++ ports for multi-gig wireless and workstation uplinks; 400W total PoE budget with up to 60W per port; 2x 10G SFP+ uplinks; 112 Gbps switching capacity and 56 Gbps non-blocking throughput; managed centrally through UniFi Network; list price of $799 USD from Ubiquiti's US store is competitive for L3 PoE++ hardware
✘ Cons:400W total PoE budget is limited if many high-power PoE++ devices are connected at once; No physical stacking documented, so scaling beyond one unit needs separate management; Port breakdown is described inconsistently across retailer listings, so the official Ubiquiti datasheet should be checked; Reseller prices vary widely (about $799 to $951 USD, plus higher regional prices); Independent hands-on reviews with measured performance were not found; Requires UniFi Network 8.0.24 or later for management