Interfaces: 8x 1GbE RJ45 (1G/100M/10M); 1x 2.5GbE RJ45 (2.5G/1G/100M/10M); 2x 10G SFP+ (10G/1G); default WAN is 1x 10G SFP+ and 1x 2.5GbE RJ45; up to 8 WAN ports supported
Form Factor: Rack mount 1U (442.4 x 43.7 x 285.6 mm; 4.7 kg)
✔ Pros:Ubiquiti rates 5 Gbps IDS/IPS throughput, which is strong for a 1U gateway at this price; Ten gigabit SFP+ ports plus a 2.5GbE port give fast multi-WAN and uplink options; Integrated 128 GB SSD and two NVR HDD bays allow local UniFi Protect recording without extra hardware; Full feature set including zone-based firewall, DPI, content filtering, IPsec/OpenVPN/WireGuard VPN, OSPF and BGP; Redundancy options such as VRRP shadow mode, gateway failover and DC power backup; Low 60W maximum power draw and NDAA-compliant hardware
✘ Cons:Ubiquiti does not publish firewall throughput, VPN throughput, session capacity or new sessions per second, which makes sizing harder; Only 5 Gbps IDS/IPS is specified, which may bottleneck high-bandwidth sites with threat prevention enabled; Eight 1GbE LAN ports is limited if you need many wired drops or 2.5G/10G client access; No PoE, so separate switches or injectors are needed for PoE devices; Retail prices vary widely across sellers, and the price range is wider than the official MSRP suggests; Requires UniFi Network controller management, which may not suit teams wanting a standalone firewall
Max Sessions: 75 million concurrent with AVC (FTD); 240 million concurrent firewall connections (ASA)
New Sessions/sec: 1.5 million new connections/sec with AVC (FTD); 4.5 million new connections/sec (ASA)
Interfaces: 12 x 1/10/25/50G SFP56 fixed + 4 x 40/100/200G QSFP56 fixed; 2 x 1/10/25G SFP28 management; 2 network module slots (up to 28 x 1/10/25/50G, 12 x 40/100/200G, 4 x 400G QSFP-DD with modules); 1 x RJ-45 console, 1 x USB 3.0
Form Factor: 2RU 19-inch rack; 3.5in H x 16.9in W x 32.5in D; 66 lb (29.9 kg) loaded; 1740 W typical / 2440 W max power
Curation Review
✔ Pros:Very high throughput for a 2RU appliance, with 600 Gbps FTD firewall + AVC and 650 Gbps ASA stateful throughput; Modular I/O bays up to 400G QSFP-DD allow flexible high-speed design; Clustering supports up to 16 units for scale-out and high availability; Up to 75 million concurrent sessions and 1.5 million new connections per second with AVC; Supports both ASA and Threat Defense software images (separate SKUs)
✘ Cons:Very high acquisition cost: US reseller list prices run about $0.78M to $1.49M before licensing; Threat-prevention figure (550 Gbps) is well below the headline firewall throughput, so IPS-heavy deployments need real-world sizing; IPsec VPN throughput (450 Gbps FTD) and session figures depend on test conditions and software image; Ordering is quote-based, with several US resellers showing items out of stock; Annual threat licensing is an extra recurring cost on top of hardware; Power draw of up to 2440 W and 2RU footprint require substantial data center power and cooling