Primary Device
Ubiquiti USW-Pro-24-PoE
★ 4.6 Value Score
Technical Specifications
- Switching Capacity: 680 Gbps
- Forwarding Rate: 510 Gbps
- Ports: 24u00d7 2.5GbE PoE+ + 2u00d7 10GbE SFP+
- PoE Budget: 960W (802.3at/af+)
- Layer: L3 (routing capable)
- Stacking Support: Yes, up to 10 units (50Gbps stacking bandwidth)
- Max Power Consumption: 1380W (typical 1000W)
- Dimensions: 442 u00d7 356 u00d7 44 mm
- Operating Temperature: 0u201340u00b0C
Curation Review
- ✔ Pros: Excellent PoE capacity (960W) for dense PoE device deployments; 2.5GbE ports future-proof but not oversized; 10GbE SFP+ uplinks enable scalable data center or campus core connectivity; Layer 3 routing for micro-segmentation; stackable for redundancy and higher throughput aggregation; UNMS/UniFi management integration with cloud or on-prem controllers; fanless passive cooling option available
- ✘ Cons: Expensive entry point ($1200+) compared to L2-only switches; 2.5GbE ports may be overkill for many deployments (would justify 1GbE + 10GbE); high PoE power budget drives electricity costs; limited L3 feature set vs. carrier-grade routers; firmware bugs/delays historically slower than competition; requires UniFi ecosystem buy-in for optimal management; redundant power supply not standard
- Est. Price: $1,200 - $1,500
Compare Against
Cisco Catalyst 9200 Series
★ 3.3 Value Score
Technical Specifications
- Device Type: Modular Enterprise Access/Campus Switch
- Switching Capacity: 1.4 Tbps
- Forwarding Rate: 1 Billion packets/second (1 Bpps)
- Ports (Typical C9200-48PXG): 48u00d71G + 4u00d710G uplink ports
- PoE Budget: 1440W (with appropriate PSU)
- Layer: L3 (Layer 3 routing)
- Stacking Support: Yes - up to 9 units via FlexStack Plus
- Throughput Per Port: Up to 100 Gbps aggregate (varies by model)
- Protocol Support: IPv4, IPv6, EIGRP, OSPF, BGP, VLANs, ACLs
- Redundancy: Dual PSU support, StackWise Virtual (SVL)
- Management: Cisco IOS-XE OS, NETCONF/YANG, SNMP, SSH
- Form Factor: 2RU rack mount, modular components
- Buffer Memory: Up to 32 MB packet buffer
- Max MAC Addresses: 256K MAC address table
- VLAN Support: Up to 4094 VLANs
Curation Review
- ✔ Pros: Industry-leading switching fabric with 1.4 Tbps capacity enabling high-density deployments; Modular design with FlexStack Plus stacking supports enterprise scaling up to 9 switches for 432+ ports in single logical unit; Comprehensive PoE+ support (1440W) powers modern IP cameras, APs, and IoT devices; Advanced L3 routing capabilities with support for EIGRP, OSPF, BGP eliminate need for separate core routers in many designs; StackWise Virtual (SVL) provides true redundancy with active-active operation; Rich security features including ACLs, 802.1X port authentication, DHCP snooping, and dynamic ARP inspection; Cisco IOS-XE provides proven, stable OS with frequent updates and broad ecosystem support
- ✘ Cons: Premium pricing ($5K–$15K+) compared to competing vendor switches limits adoption in budget-conscious environments; Complexity of IOS-XE command-line interface and feature-rich configuration requires experienced network engineers, increasing deployment time; Cisco licensing model (e.g., DNA subscriptions, smart licenses) adds recurring costs beyond hardware purchase; Power consumption (300–500W typical) requires adequate data center infrastructure planning; Fan noise level can be significant in office-adjacent environments; Learning curve for advanced features like segment routing and micro-segmentation; Stacking requires specialized cables and careful network design to avoid single points of failure
- Est. Price: $5,200 - $14,800
Popular Comparisons
Ubiquiti USW-Pro-24-PoE vs Ubiquiti UniFi Pro Max 24 PoE
Ubiquiti USW-Pro-24-PoE vs Ubiquiti Pro Max Aggregation (USW-Pro-Max-Aggregation)
Ubiquiti USW-Pro-24-PoE vs Ubiquiti Enterprise 8 PoE
Ubiquiti USW-Pro-24-PoE vs Ubiquiti UniFi Switch Pro Max 16 PoE
Ubiquiti USW-Pro-24-PoE vs Ubiquiti UniFi Standard 24 PoE (USW-24-POE)