Stacking Support: Yes, up to 10 units (50Gbps stacking bandwidth)
Max Power Consumption: 1380W (typical 1000W)
Dimensions: 442 u00d7 356 u00d7 44 mm
Operating Temperature: 0u201340u00b0C
Curation Review
✔ Pros:Excellent PoE capacity (960W) for dense PoE device deployments; 2.5GbE ports future-proof but not oversized; 10GbE SFP+ uplinks enable scalable data center or campus core connectivity; Layer 3 routing for micro-segmentation; stackable for redundancy and higher throughput aggregation; UNMS/UniFi management integration with cloud or on-prem controllers; fanless passive cooling option available
✘ Cons:Expensive entry point ($1200+) compared to L2-only switches; 2.5GbE ports may be overkill for many deployments (would justify 1GbE + 10GbE); high PoE power budget drives electricity costs; limited L3 feature set vs. carrier-grade routers; firmware bugs/delays historically slower than competition; requires UniFi ecosystem buy-in for optimal management; redundant power supply not standard
✔ Pros:Excellent UniFi ecosystem integration with centralized management; Enterprise-grade PoE+ support (30W per port) with 190W total budget; Layer 3 routing capabilities for advanced network segmentation; Dual 10GbE SFP+ uplinks for high-speed backbone connectivity; Reliable passive cooling with no fans for quiet operation
✘ Cons:10GbE uplinks limited to SFP+ (fiber modules required, sold separately); Forwarding rate modest compared to enterprise-class switches from Cisco/Juniper; No redundant power supply option; PoE budget may be limiting in very dense AP/camera deployments (max ~19 devices at full 10W); Limited advanced routing and ACL features vs. dedicated L3 routers